Quik-Latch Hood Pin Kit Low-Profile Series QL-38 Polished

Add the hood pins you’ve been looking for to your car, truck or SUV while simultaneously upgrading your exterior style with this Quik-Latch QL-38-LP/P Polished QL-38 Low-Profile Series Hood Pin Kit. Designed to fit any vehicle, this hood pin kit will ensure your hood is staying securely fastened without negatively impacting your style or profile.

Features and Benefits:
- Fits any vehicle
- Latch assembly is constructed from 6061 T6 aluminum
- 303 stainless steel hardware
- Push button release mechanism
- 500lbs holding force (per latch)
- 8oz total weight of kit
- Polished finish
- 1-3/4” diameter body
- Sleek, aerodynamic and strong design
- Made in the USA

Designed with a medium size body that is sleek, aerodynamic and strong, the construction elements that comprise these hood pins include 6061 T6 billet aluminum bodies with supporting components that are constructed of 303 stainless steel. As an added benefit, these hood pins can be painted to match or accent your exterior. The Quik-Latch Hood Fasteners mount to the hood and line up with mounting pin that is placed on the core support, or any other brackets under the hood. Once the hood is closed, Quik-Latch Fasteners automatically latch to the Ball Pin studs, and will not release the hood until the center button is depressed.

Kit Includes:
- Pair of Latch Mechanisms
- Pair of Retaining Rings
- 3/8” x 24 Stainless Steel Nuts Four (4)
- Foam Backing Pads Two (2)
- 3/8” Stainless Steel Washers Four (4)
- 3/8” x 24 Mounting Pins Two (2)
- Tube Thread Locker
- Installation Instructions

Dimensions:
- Height: .875”
- Height Below Mounting Flange: 3/4”
- O.D Latch Mounting Flange: 1-3/4”
- Thread Size of Latch Body: 1-1/8 x 24 UNEF
- Hole Size Required to Mount Latch: 1-1/4”
- Pin Dimensions: 3/8 Ball with 3/8 x 24 Thread
- Retaining Ring: 1-1/2” O.D x 1/4” Thickness
- Maximum Mounting Angle: 18 Degrees
- Distance needed to Engage Pin into Latch: .687”
- Minimum Distance from Top of Mounting Surface to Mounting Point: 1-1/8”
- Maximum Distance from Top of Mounting Surface to Mounting Point: 3-1/2”

Please Note: The QL-38 Hood Pin Kit can also be used for Decklids or whatever you want to Quik-Latch.

Made right here in the USA, latches produced by Quik-Latch function with a patented easy push button release mechanism which allows for easy and fast release of latched components.