Quik-Latch Hood Pin Kit Locking Series QL-38 Black
Highlights
- Lockable Style Hood Pin Kit
- 1-3/4" Diameter Body
- 500lb Holding Force Per Latch
- Push Button Release
Quik-Latch Black QL-38 Locking Series Hood Pin Kit.
Ensure a secure closure for the hood on your car, truck or SUV without impacting the valuable engine bay components with this American made Quik-Latch (QL-38-LP) Black QL-38 Locking Series Hood Pin Kit. Designed with function and style in mind, this hood pin kit adds a touch of sleek style to the exterior you work so hard to maintain.
Features and Benefits:
- Fits any vehicle
- Latch assembly is constructed from 6061 T6 aluminum
- 303 stainless steel hardware
- Push button release mechanism
- Lock Style Hood Pin Kit
- 500lbs holding force (per latch)
- 9.4oz total weight of kit
- Black finish
- 1-3/4” diameter body
- Sleek, aerodynamic and strong design
- Made in the USA
With a 6061 T6 aluminum constructed latch assembly reinforced by 303 stainless steel hardware, this hood pin kit is extremely durable to stand up to high winds at highway speeds. The push button release mechanism features a locking option that will ensure the release cannot be pushed until this kit in unlocked again. Sleek, aerodynamic design is extremely strong and topped off with a black finish that serves as an excellent stylistic accent. Made in the USA, this hood pin kit is easily installed to get you back out enjoying the road or trail in no time flat.
Made right here in the USA, latches produced by Quik-Latch function with a patented easy push button release mechanism which allows for easy and fast release of latched components.
Kit Includes:
- Pair of Latch Mechanisms
- Pair of Retaining Rings
- 3/8” x 24 Stainless Steel Nuts Four (4)
- Foam Backing Pads Two (2)
- 3/8” Stainless Steel Washers Four (4)
- 3/8” x 24 Mounting Pins Two (2)
- Tube Thread Locker
- Installation Instructions
Dimensions:
- Height: .875”
- Height Below Mounting Flange: 3/4”
- O.D Latch Mounting Flange: 1-3/4”
- Thread Size of Latch Body: 1-1/8 x 24 UNEF
- Hole Size Required to Mount Latch: 1-1/4”
- Pin Dimensions: 3/8 Ball with 3/8 x 24 Thread
- Retaining Ring: 1-1/2” O.D x 1/4” Thickness
- Maximum Mounting Angle: 18 Degrees
- Distance needed to Engage Pin into Latch: .687”
- Minimum Distance from Top of Mounting Surface to Mounting Point: 1-1/8”
- Maximum Distance from Top of Mounting Surface to Mounting Point: 3-1/2”
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Body & Sheet Metal, Mustang Hoods & Hood Components, Mustang Hood Locks & Pins, Ford Focus ST Parts
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following C/K years:
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following F-150 years:
This product will fit the following Focus years:
This product will fit the following Mustang years:
- 1964.5,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
- 1999,
- 2000,
- 2001,
- 2002,
- 2003,
- 2004,
- 2005,
- 2006,
- 2007,
- 2008,
- 2009,
- 2010,
- 2011,
- 2012,
- 2013,
- 2014,
- 2015,
- 2016,
- 2017,
- 2018,
- 2019,
- 2020,
- 2021,
- 2022,
- 2023,
- 2024,
- 2025,
