Redline Tuning Hood Strut Kit QuickLIFT PLUS Bolt-In GT350/GT350R 2015-2020
Redline Tuning Hood Strut Kit QuickLIFT PLUS Bolt-In GT350/GT350R 2015-2019 is rated out of 5 by 19.
- Black Powder-Coated Hardware
- Installation Hardware Included
- Easy Installation
Rated 5 out of 5 by Andy Z from Every GT350 should have these!!! I have been using Redline Tuning’s hood lifts since 1998 on several Mustangs, most currently on my 2016 GT350. Very high quality components, and easy detailed installation instructions. This system fits perfectly and only took me 20 minutes to install. The hole needed for the strut on the passenger side battery cover is barely noticeable and they even include the stepped drill bit! Hood raises a little higher than the ancient prop rod with no effort and stays put. The shocks give your engine compartment a very clean look and are absolutely worth $100, highly recommended!!!
Date published: 2016-02-24
Rated 5 out of 5 by MarcSpaz from Outstanding Product I recently picked up these hood struts for my 2016 Mustang GT350. Delivery was early, the product packaging was practical and very sturdy, protecting the parts inside. The finish and quality of craftsmanship are worthy to be installed on the finest vehicle. The parts installed in about 10 minutes, with very easy to follow instructions. The struts do a great job of both assisting the opening of the hood as well as keeping the hood open and stable. At a cruise-in over the weekend, there was plenty of wind, but the struts held up and kept the hood open. I would recommend this product line to anyone.
Date published: 2017-07-13
Rated 5 out of 5 by Relak from Top Notch Coming from a BMW M4 to the Shelby GT350, hood struts are those things you take for granted in a high end car. The fact that the Shelby didn't come with them is a little odd but definitely glad that I installed these. They're super strong so just lifting up the hood slightly and the struts power the hood up the rest of the way. The install was really easy as well with no drilling required and only having to cut a slight notch in the battery cover. Overall this thing is worth it
Date published: 2016-12-13
Rated 5 out of 5 by Dingodawg from Great touch of class! Brought these and installed them right away. Instructions and pictures proved that a quick and easy installation was adhieved in a short time. They look great and add a professional touch to the engine bay!
Date published: 2016-03-22
Rated 5 out of 5 by Robotman from Fits the GT 350 perfectly. After buying a Ford Licensed hood strut kit for the GT 350 and finding that it did not fit, I bought the Redline Tuning strut kit. It fits the GT 350 perfectly. Installation took about 20 minutes.
Date published: 2016-03-23
Rated 5 out of 5 by Laserranger from Worked great! I bought these for my gt350 and they were easy to install. Only took about an hour, (I took my time to do it right) they worked awesome! I would recommend highly!
Date published: 2016-12-16
Rated 5 out of 5 by racer172 from Awesome quality product! I am really happy with the addition of the Redline hood struts to my new '17 GT350, they work perfectly and I've eliminated the stock hood-prop rod. Installation tip: the Redline struts come pretty stiff, work them in/out on your workbench before installation so you don't bend your hood pulling it down.
Date published: 2018-02-14
Rated 5 out of 5 by Piper from Great product I am very pleased with this product. Looks good and works great. Only problem was hole that is drilled in battery cover should be 1in. Instead of 3/4in.
Date published: 2016-08-31
I bought and install one of these Redline strut kid from you and I like to know how do you remove the struts from the ball head when I have to remove the batter cover to work on the battery please?
Remove the metal clip at the end of the gas cylinder and pry the strut from the ball stud with a prying tool.
Date published: 2018-10-26
I dropped the red part of the fender bracket into the frame. Is there a way I could take it out?
Try to find a rod that is bendable like a clothes hanger, put something sticky on the end to fish it out.
Date published: 2018-02-02
I own a Shelby GT-H and the Hood is very heavy, will the GT350 work in my application?
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2017-12-08
What is the difference between the Redline Tuning Hood Strut kit PLUS and the Redline Tuning Hood Strut kit Elite?
The ELITE has a stainless steel body and custom valving, the PLUS does not. But you cannot go wrong with either one.
Date published: 2017-11-15
After installing the strut kit, if battery cover needs to be removed, does the strut need to be popped off to remove the battery cover? And is it relatively easy to pop it off and will it compromise the lower strut connection on the battery side?
The instruction sheet clearly explains that for this purpose, you can cut a straight line from the outside of the cover directly to the drilled hole and therefore alleviate the need for removing the shock for battery replacement. I did it on mine... And BTW, as mentioned above...the hole really should be 1" in diameter. The 3/4" hole is not quite enuf. ;-)
Date published: 2017-11-15
Complete Your Package