Rod & Custom Rear Coil Over Conversion Kit 9" 1965-1970

Rod & Custom Motorsports:
RCCK1
Rod & Custom Rear Coil Over Conversion Kit 9" 1965-1970 is rated 5.0 out of 5 by 1.
  • y_2020, m_7, d_9, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RCCK1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 129.35ms
  • REVIEWS, PRODUCT

Highlights

  • Bare Steel Finish
  • Works On 9" Rear Ends
  • Fully Adjustable
  • Bolt In Installation
$2,153.99

Rod & Custom Rear Coil Over Conversion Kit for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with a 9" Rear End.

One of the best ways to get a more modern feel out of your 1965-1970 Mustang is install coil overs. This rear coil over conversion kit from Rod & Custom is designed to work on all 1965-1970 Mustangs with a 9" rear end. Rod & Custom makes this rear coil over conversion kit (RCCK1) easy to install by using bolts to install the whole kit. The coil over system gives you a wide range of adjustments providing the best ride for different driving styles.

The rear coil over kit is fully tig welded for maximum strength. Rod & Customs rear suspension comes in its natural steel finish that can be painted or powder coated by the customer. Rod & Custom includes a 3/4" rear sway bar which helps prevent excessive body roll. The upper control arms are adjustable for fine tuning the pinion angle if necessary.

Features:
- Fits 1965-1970 Mustangs
- Works on 9" Rear Ends
- Coil Over Suspension
- Bare Steel Finish
- Fully Adjustable
- Modern Driving experience
- Bolt in Installation

*Due to the lay out of the rear coil overs you may have to modify the exhaust to make it fit over the rear axle

Please Note: The 9" rear housing is not included with this rear coil over conversion kit.

The rear coil overs feature a true billet aluminum body that has a wide range of adjustments. Rod & Custom uses spherical rod ends that make up the upper two triangulated links and bolts to your housing using the center section bracket. This rear suspension system (RCCK1) is manufactured using U.S.A. D.O.M. 1" O.D. x .120 wall round steel tubing, this kit also includes American made 5/8" chrome moly rod ends and bolts together with Grade 8 bolts.

Rod & Custom Motorsports is a small based company that focuses on suspension upgrades for classic Fords, like the first generation Mustang. Since the suspension on these models likely already has over 40 years of service under its belt, and is based on 40+ year old technology. Rod & Custom Motorsports has designed and developed several different solutions for both the front and rear suspensions on these classic Mustangs, giving you lots of options to get rid of that outdated, poorly performing suspension.

Purchase a new Rod & Custom Rear Coil over Conversion Kit for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang with an 9" Rear End from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from More dollars? Yes you will spend a few more dollars,,,BUT,,,it's supper quality,top notch parts,,that work,,I installed IFS front,4link out back,,and yes,,I would certainly use them again
Date published: 2017-02-25
  • y_2020, m_7, d_9, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RCCK1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.22ms
  • REVIEWS, PRODUCT

will it also work on a cougar?

Asked by: JP99
Yes.
Answered by: rk cjpp
Date published: 2020-04-05

Do you have the spring perches available for purchase? I have a 9 inch housing, however the spring perches have been removed.

Asked by: Brownie66
Sorry we do not.
Answered by: rk cjpp
Date published: 2019-07-10

with this kit, what is the maximum width of wheels that I can install?

Asked by: rafaesprom
This will not allow an increase in wheel width than what is currently being used.
Answered by: rk cjpp
Date published: 2019-09-18

Will this fit a 8 inch rear end and if no do you have a kit  that would be fit for a 8 inching 

Asked by: Marty
Here is the link. https://www.cjponyparts.com/rod-custom-rear-coil-over-conversion-kit-8-1965-1970/p/RCCK/
Answered by: rk cjpp
Date published: 2019-04-02

Will this kit fit a 72 Maverick with a 66 mustang rear end?

Asked by: Lancer
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2018-12-03

I am looking for a rear coil over kit with disc brake conversion for a Mustang 69 Mach 1. Can you please advise the best kit. Would like to be able to adjust the ride height.

Asked by: Luke 1969 mach 1
This kit will work for the coil over conversion. The rear disc brakes would have to be purchased separately. We offer several different kits. If you need help choosing please call toll free at 1-800-888-6473 and speak with a sales rep.
Answered by: rk cjpp
Date published: 2018-11-02

Would this fit for a 1971 Mach 1 with a 9 inch rear?

Asked by: angryrobs
No it will not.
Answered by: rk cjpp
Date published: 2018-09-21

Does this kit change the rear ride height any? And also can I run a wider tire with this?

Asked by: Brooks4747
The ride height is adjustable, you cannot run a wider tire.
Answered by: rk cjpp
Date published: 2019-11-23
  • y_2020, m_7, d_10, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_RCCK1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 115.62ms
  • QUESTIONS, PRODUCT