Roush MagneRide Red 30MM Lowering Spring Kit Mustang GT 2018-2024

This Lowering Spring Kit is meticulously designed to improve the stance and performance of your S550 or S650! It is engineered for use with 2018-2024 GT Mustangs equipped with MagneRide.

Features and Benefits:
- 30mm Lowering Spring Kit
- Designed to fit MagneRide-equipped Mustangs
- Front Spring Rate: 214 lbf/in to 248 lbf/in
- Rear Spring Rate: 494 lbf/in to 934 lbf/in
- Lowers ride height on all four corners
- Increased handling and improved traction
- Better track times and control during track events
- Improved stance with an aggressive look
- Red powder-coated spring finish

Featuring a front spring rate of 214 lbf/in to 248 lbf/in and a rear spring rate of 494 lbf/in to 934 lbf/in, this kit (422330) from Roush ensures precise handling and improved traction. Lowering the ride height on all four corners, it delivers better track times and superior control during track events. This makes it much easier to perform heavy cornering without body roll. It achieves this using red powder-coated 30mm springs that give your Mustang an aggressive look.

Tech Tip 1: For best performance and to fine tune your MagneRide suspension we highly recommend using Roush MagneRide Calibration (P/N: 42231).
Tech Tip 2: Please reference a Ford service manual or the installation instructions for information and the correct torque specifications.

Please Note: CJ Pony Parts highly recommends getting an alignment after installation to ensure your Mustang's specs are in check.