Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks With 450lb Springs 1965-1966
- Full Front Coil Spring System
- Adjustable Upper Control Arms
- Adjustable Strut Rods
- Single Adjustable Shock Body
Total Control Products Front Coilover Conversion Kit with 1" Drop Shaft, Quickset 1 Shocks and 450lb Springs for all 1965-1966 Mustangs.
Score this fully adjustable front coilover suspension system at CJ Pony Parts and enjoy the benefits of utilizing key factory mounting locations to greatly simplify the installation process today! With this great new Total Control Products Front Coilover Conversion Kit with Quickset 1 Shocks and 1" Drop Shaft for all 1965-1966 Mustangs, you’ll be getting high quality, performance level suspension components that will fix the poor geometry and improve the look and feel of the stock set up in your 1965-1966 Mustang. This front coilover kit is fully adjustable, making it perfect for anyone that cruises the street and also likes to let her wide open on the track!
Coilover Conversion Kit Includes:
- Pair of Single Adjustable Quickset 1 Coilover Shocks
- Pair of Adjustable Upper Control Arms
- Pair of TrueCenter Lower Control Arms
- Pair of TrueCenter Adjustable Strut Rods
- Pair of 450lbs. Coil Springs
- Pair of 1” Drop Pivot Shafts
- All Necessary Mounting Hardware
Please Note: This Front Suspension Kit does NOT include the Spindles.
The lightweight, billet-aluminum, single-adjustable VariShock coil-overs have 16-positions to adjust the softness or firmness of your ride where both bump and rebound are adjusted simultaneously. This Total Control Products Front Coilover Conversion Kit is designed to keep the tire contact patch flat on the road surface and control wheel movement without creating a harsh ride. These awesome coilovers will reduce body roll and pitch while helping to maintain precise control of the spindle position and the suspension travel arc. These American made VariShocks are constructed from only premium components, where each shock performs identically. Unlike other cheaper shocks, these are housed right inside of the performance coilover springs for a great looking, compact design.
The included Upper Control Arms are constructed from 1" x .156" wall steel tubing and feature double adjustment couplers with an adjustment range of 1". The caster can be adjusted within 6 degrees and camber can be adjusted within 5-1/2 degrees. Alloy-steel rod ends contain low friction, polymer bearing races which help eliminate deflection and the increasing resistance found with typical rubber and polyurethane bushings. A four bolt ball joint has a relocated zerk fitting for easier access and shim sets are provided for alignment purposes.
TrueCenter Lower Control Arms improve suspension geometry by precisely controlling the ball joint travel arc. The inner bushing on the control arm features a spherical bearing with high strength polymer races which create a deflection free, low friction pivot point. This bearing setup can safely handle caster settings far beyond the ability of rubber or polyurethane bushings. A threaded retaining ring and locking set screw maintain bearing preload. These control arms are also constructed from 1-1/8" x .156" wall steel tubing, which is connected to the 1-1/4" shank socket housing by an overlapping robotic spray-arc welded joint. The ball joint plates and mid-plates are made from 1/4" steel which eliminate deflection at the spindle and OEM positioned sway bar attachment points.
TrueCenter Strut Rods maintain correct suspension geometry without the increased resistance found with rubber and polyurethane bushings. Caster adjustment can be changed 3 to 4 degrees depending on the specific application. Also, up to 12 degrees of misalignment is available in any direction which allows the strut rod to rotate beyond the limits of a standard rod end. A low friction pivot center with zero deflection is achieved with the use of high strength, non-compressible polymer bearing races. The strut rod is constructed from 1" x .156" wall steel tubing with a large crimped end that is robotic spray-arc welded to a 5/16" steel control arm adapter plate with an integrated steering stop.
With this awesome, new Total Control Products Front Coilover Conversion Kit with Quickset 1 Shocks and 1" Drop Shaft for all 1965-1966 Mustangs you’ll immediately see and feel the difference in the way your Mustang rides, handles, maneuvers and performs! Order yours today from CJ Pony Parts and enjoy the fully adjustable VariShocks and superb quality coil overs that work in perfect harmony with new upper and lower control arms to give you a versatile, impeccable feeling and functioning suspension!
California Residents: Proposition 65 Warning