Total Control Products Coilover Rear Suspension Kit With G-Bar Lower Control Arms 1971-1973
- Adj. Rear Coilover System
- G-Bar 4 Link Rear Suspension
- Adjustable Upper Control Arms
- Improves Suspension Perf.
Total Control Products Coilover Rear Suspension Kit with G-Bar Lower Control Arms for 1971, 1972 and 1973 Mustangs.
If your looking for a more modern rear suspension kit that will replace your factory leaf springs you came to the right place! This Rear Coilover Suspension Kit from Total Control Products is a direct replacement for 1971-1973 Mustangs with a factory 8", 9" or a FAB9 rear end housing from Total Control Products. This rear four link suspension kit with coilovers mounts in the same location as the original leaf springs.
Features and Benefits:
- Modern Style Four Link Suspension
- Improve Ride Quality and Performance
- Added Room for Larger Exhaust
- Polyurethane Bushings
- 200lb. Rate Springs
- Fixed Valving VariShock Coilovers
- Fully Adjustable Suspension
- Easy to Read Instructions
Please Note: Some welding is required when you install this suspension kit on your Mustang.
Total Control Products installs polyurethane bushings on their G-Bar upper and lower control arms. The polyurethane bushings provide a quiet ride as well as improves the handling making it ideal for street driving. The lower control arms in this kit have a fixed length. The upper control arms are adjustable, this helps fix the pinion angle when you change the suspension geometry. The adjustable rod ends are constructed from Billet Alloy Steel with a massive 7/8” shank. On either end of the upper and lower control arm a zerk fitting is installed to help keep the bushings lubricated.
- Subframe Cradle
- Single Adjustable Upper Control Arms with Polyurethane Bushings
- Lower Control Arms with Polyurethane Bushings
- Fixed Valving VariShock Coilovers with Springs
- Mounting Hardware
The Rear SensiSet Shocks feature factory preset valuing making it ideal for all everyday driving. The Coilover shocks were developed with extensive dyno and road testing. On the body of the shock is a treaded section which allows the coilover ring to be adjusted. With the different lowering mounts Total Control Products gives you the ability to lower the rear of your Mustang 4-1/2”. The upper shock mount has three different shock mounts this increases cornering stability.
Please Note: This Rear Suspension Kit does not include the Rear Axle Housing.
Order this Total Control Products Coilover Rear Suspension Kit with G-Bar Lower Control Arms for your 1971, 1972 or 1973 Mustang today from CJ Pony Parts.
California Residents: Proposition 65 Warning
Advanced skill is required for this installation.