While many classic Mustang owners stay true to stock when replacing parts, you may want to take advantage of modern capabilities with a Restomod suspension system. That's why Total Control Products offers this Rear Suspension System (5801M30-1ML0A) with Quickset 1 Air Springs and G-Bar Lower Control Arms, all in a direct-fit package for your 1971-1973 Mustang.
Features and Benefits:
- Modern Style Four Link Suspension
- Improve Ride Quality and Performance
- Added Room for Larger Exhaust
- Premium Polyurethane Bushings
- Adjustable Suspension Geometry
Once you consider the advantages of this suspension kit, you'll want to ditch your original leaf springs instantly! You'll certainly be impressed with the Total Control Products Quickset 1 Air Spring Shocks. Ride height adjustability is available with the simple press of a button, while you're able to adjust compression and rebound thanks to an adjustable knob. In mere moments, you can deflate the Air Springs and lower your Mustang a full five to six inches. The VariShock shock body also features a threaded section, allowing you to adjust the ride height and fine-tune the suspension when fully aired up.
- Sub Frame Cradle
- Adjustable Valve Quickset 1 Air Spring Shocks
- Single Adjustable Upper Control Arms with Polyurethane Bushings
- G-Bar Lower Control Arms With Polyurethane Bushings
- Easy to Read Instructions
- All Necessary Mounting Hardware
Also included in the Rear Suspension System are single adjustable upper control arms and G-Bar lower control arms. Each control arm is fitted with polyurethane bushings for quiet operation and superior handling. These features make the control arms perfect for street driving. A corresponding zerk fitting is installed on either end of each control arm to keep the bushings lubricated.
The G-Bar lower control arms in this kit have a fixed length, while the upper control arms are adjustable. This helps correct pinion angle when you alter the suspension geometry. You'll also receive adjustable rod ends constructed of Billet Alloy Steel with a massive 7/8-inch shank.
*A Compressor System is required when you install this kit on your 1971-1973 Mustang
Please Note: This Total Control Suspension Kit will require welding for a proper installation. This Rear Suspension Kit does not include the Rear Axle Housing.