Trufiber Hood A49-3 Heat Extractor Fiberglass V6/GT 2010-2012

Trufiber:
TF10025-A49-3

Highlights

  • Direct Fit Upgrade
  • 3K, 2 X 2 Twill Weave
  • Clear Coat W/ UV Protection
  • Paintable
MSRP $629.99
$599.99
You save $30.00
Earn
points.

Trufiber Fiberglass A49-3 Heat Extractor Hood for all 2010, 2011 and 2012 V6 and GT Mustangs.

If you're looking for a hood that's both good-looking and could help improve engine performance for your 2010-2012 Mustang, you should definitely take a look at this fiberglass hood from Trufiber. It'll give you the very best of both of these worlds!

Features & Benefits:
- Hand-Laid Fiberglass
- Unpainted Smooth Gel Coat Finish on Top and Bottom
- Fully Functional Heat Extractor: Hot Air Exits from Two Heat Extractor Vents
- Reinforced Metal Latch and Hinge Plates for Added Safety
- Comes with a Pre-Drilled Prop Hole
- Direct Bolt-On Installation (Six Bolts Included)
- Paintable
- Approximate Weight: 40 Pounds

This Trufiber TF10025-A49-3 Fiberglass A49-3 Heat Extractor Hood is made out of hand-laid fiberglass with a smooth gel coat finish on the top and bottom. It's not painted, so you can paint it any color you want! It also features a heat extractor, which will draw hot air away from your engine and help it perform better. It also comes with a reinforced metal latch and hinge plates for additional safety and security. Installing this fiberglass hood will be an easier job thanks to the fact that the six bolts you'll need are included when you place your order. It also comes with the prop hole pre-drilled, so you don't even have to worry about doing that! Weighing in at a mere 40 pounds, this hood is both lightweight and durable.

At CJ Pony Parts, we specialize in providing Mustang enthusiasts with the right parts at the right prices. Our selection of aftermarket parts includes a huge assortment of Mustang hoods and hood components such as scoops, turn signals, latches and more!

Please Note: This hood requires the Trufiber Universal Windshield Washer Relocator Kit. Please see HW3494.

*Although it is not required, it is highly recommended that you invest in a set of hood pins to safely secure your aftermarket hood.

Order a Trufiber TF10025-A49-3 Fiberglass A49-3 Heat Extractor Hood for your 2010, 2011 or 2012 V6 or GT Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Body & Sheet Metal, Mustang Hoods & Hood Components, Mustang Cowl Hoods

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account