Trufiber Hood A53 Ram Air Carbon Fiber V6/GT 2010-2012
- Direct Fit Upgrade
- 3K, 2 X 2 Twill Weave
- Clear Coat W/ UV Protection
Trufiber Carbon Fiber A53 Ram Air Hood for all 2010, 2011 and 2012 V6 and GT Mustangs.
If you're looking for a high-quality carbon fiber hood for your 2010-2012 Mustang, you should take a look at this hood by Trufiber. With a smooth, show-quality finish and a built-in ram air kit that's also removable, you'll enjoy a great-looking hood that could also help improve your Mustang's engine performance!
Features & Benefits:
- Made from Paintable Vacuum-Infused Real Carbon Fiber
- 3K, 2 x 2 Twill Weave
- Show-Quality Clear Coat Finish with UV Protection
- Smooth Gel Coat Finish on Bottom
- Built-In Ram Air Kit (Removable)
- Fully Functional Ram Air: Cool Air Enters Opening Air Scoop and Directs to the OEM Air Box
- Fully Functional Heat Extractor: Hot Air Exits from Two Open Aluminum Heat Extractor Vents (Removable Vents)
- Reinforced Metal Latch and Hinge Plates for Added Safety and Security
- Integrated Stainless Mesh Grille
- Pre-Drilled Prop Hole
- Direct Bolt-On Installation (Bolts Included)
- Approximate Weight: 30 Pounds
This Trufiber TC10025-A53 Carbon Fiber A53 Ram Air Hood is made out of paintable vacuum-infused real carbon fiber with a 3K 2 x 2 twill weave. It also features a lovely show-quality clear coat finish with UV protection. This UV protection means you won't have to worry about the sun fading your new hood! Plus, with a smooth gel coat finish on the bottom and an integrated stainless mesh grille, this hood is one of the best-looking on the market today!
But there's far more to this 30-pound hood than just its appearance. It also has a built-in ram air kit that will bring more cool air into your engine compartment. From there, the two removable heat extractor vents will draw more hot air away from your engine. This could all end up resulting in better engine performance and possibly even more horsepower!
For added safety and security, Trufiber added extra reinforcement to the metal latch and hinge plates. And for added convenience, the prop rod hole comes pre-drilled. Plus, this direct bolt-on installation job will be a bit easier because the bolts you'll need for the job are also included.
Please Note: This hood requires the Trufiber Universal Windshield Washer Relocator Kit. Please see HW3494.
*Although it is not required, it is highly recommended that you invest in a set of hood pins to safely secure your aftermarket hood.
Order a Trufiber TC10025-A53 Carbon Fiber A53 Ram Air Hood for your 2010, 2011 or 2012 V6 or GT Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning