Trufiber Hood A72KR Ram Air Fiberglass V6/GT 2013-2014/GT500 2010-2014



  • Hand-Laid Fiberglass
  • Reinforced Latch/Hinge Plates
  • Two Heat Extractor Vents
  • Stainless Steel Mesh Grilles
MSRP $809.99
You save $24.00

Trufiber Fiberglass A72KR Ram Air Hood for all 2013-2014 V6 and GT Mustangs and all 2010, 2011, 2012, 2013 and 2014 GT500 Mustangs.

Are you looking for an aftermarket hood for your 2010-2014 Mustang? One that's made out of lightweight fiberglass with a built-in ram air kit that's also removable? If so, you should definitely check out this hand-laid fiberglass hood from Trufiber!

Features & Benefits:
- Made Out of Unpainted Hand-Laid Fiberglass
- Smooth Gel Coat Finish on Top and Bottom
- Built-In, Fully Functional Ram Air Kit (Removable)
- Cool Air Enters Through the Air Scoop and is Directed to the OEM Air Box
- Hot Air Exits from Fully Functional Two Heat Extractor Vents (Removable)
- Reinforced Metal Latch and Hinge Plate Areas
- Integrated Stainless Mesh Grille
- Pre-Drilled Prop Hole
- Direct Bolt-On Installation
- Approximate Weight: 40 Pounds

Tech Tip: Will require the use of double sided tape to install the heat extractors (NOT Included).

This Trufiber TF10025-A72KR Fiberglass A72KR Ram Air Hood is constructed from hand-laid fiberglass that's unpainted, which means you can paint any color you want! It has a nice and smooth gel coat finish on the top and bottom and a good-looking integrated stainless mesh grille. But this 40-pound hood offers more than just good looks! It has a built-in fully functional ram air kit that directs cool air into your engine compartment and into the OEM air box. The two removable heat extractor vents then vent the hot air back out of your engine compartment. This added air flow could help improve your engine performance and increase your horsepower!

For additional safety, this hood comes with a reinforced metal latch and hinge plates. It also comes with the prop rod hole pre-drilled. It's a direct bolt-on installation with the included bolts.

Please Note: This hood requires the Trufiber Universal Windshield Washer Relocator Kit. Please see HW3494.

*Although it is not required, it is highly recommended that you invest in a set of hood pins to safely secure your aftermarket hood.

Order a Trufiber TF10025-A72KR Fiberglass A72KR Ram Air Hood for your 2013-2014 V6 or GT Mustang or for your 2010, 2011, 2012, 2013 or 2014 GT500 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account