UPR Mild Steel K-Member Mustang 4.6L 96-04

Seamless DOM steel tubing gives this UPR K-member its strength at a lower cost than chrome moly, while still saving 33 lbs over the factory part. It adds maximum header and oil pan clearance, and thicker 1/4" motor mount pads carry the 4.6L engine for street, drag, or road race use.

The K-member is TIG welded in billet fixtures, finished in silver powder coat, and does not alter the wheelbase. It works with UPR non-adjustable or adjustable A-arms as well as factory A-arms, and it reuses the factory K-member and A-arm hardware.

Features and Benefits:
- Seamless DOM steel tubing
- Saves 33 lbs over the factory K-member
- TIG welded in billet fixtures
- Silver powder coat finish
- Does not alter wheelbase
- Works with UPR or factory A-arms
- Thicker 1/4" motor mount pads
- Maximum header and oil pan clearance

Vehicle Fitment:
- 1996-2004 Mustang 4.6L

Additional Notes:
- UPR's heavy-duty K-member hardware kit (HW2801) is an optional upgrade sold separately.
- If you use aftermarket motor mounts, the locating tab may need to be trimmed.