Vortech Supercharger Tuner Kit V3 Si-Trim Polished With Air To Air Cooler Mustang GT 2015-2017



  • Polished Trim Compressor
  • 78% Adiabatic Efficiency
  • Handles up to 750 Horsepower
  • Dual Plate Supercharger Mounts

Vortech Polished V3 Si-Trim Supercharger Tuner Kit with Air To Air Cooler for 2015, 2016 and 2017 GT Mustangs.

Increase the airflow inside the engine's air inlet assembly with the help of a Vortech Polished V3 Si-Trim Supercharger Tuner Kit 4FQ218-168L with Air To Air Cooler. Designed to upgrade the performance of your 2015-2017 GT Mustang, this 5.0L Supercharger kit takes improvement seriously with an industry-leading 78% adiabatic efficiency ([SAE J1723 standard). Generate less heat and drive more power with the polished V3 Si-Trim compressor and high flow roto-molded airbox ducting. 

Vortech takes the Air-to-Air cooler to the next level with 24" X 13" X 3.5" aluminum tubing that is mandrel bent for unrestricted airflow. The integrated air-straightener attaches to the cooler to keep your housing configured for "blow-through" use. This all-inclusive kit has everything you need to replace your air system, including a K&N panel filter and engine coolant reservoir assembly.

Features and Benefits:
- Polished V3 Si-Trim Compressor with 3.60” Drive Pulley
- Manifold Boost Pressure: 7.5-8.5 PSI @ Redline on Stock
- High-flow Roto-Molded Ducting for OEM Airbox
- Includes Dual-Plate Supercharger Mounting System
- 24" X 13" X 3.5" High Flow Air Charge Cooler
- Unrestricted, Mandrel Bent Lightweight Aluminum Charge Tubes
- Integrated Air-Straightener Upstream of the MAF Housing

- Air Charge Cooler
- 3”/3-1/2” Charge Tubes
- 98MM MAF Housing Configured for “blow-through” Use
- Vortech Maxflow race bypass valve with filter
- Ducting for OEM Airbox
- OEM K&N Panel Filter Replacement
- Stainless Steel Clamps
- Silicone Sleeves and Reducers
- Replacement Engine Coolant Pipe and Hose Assemblies
- Engine Coolant Reservoir Replacement Assembly
- Supercharger Mounting System: Idlers, Drive belt and Hardware

*Mounting system features multiple idler location positions for a wide range of belt and pulley fitments.

Tech Tip: For higher horsepower, pick up a tuner kit that does NOT include a fuel pump, fuel injectors or ECU programmer. This requires custom calibration and the required fuel components. The V-3 Si-trim supercharger included with the tuner kit is capable of up to 775HP on modified Mustangs.

Please Note: Tuner systems are NOT 50-State smog legal and are not for use in the state of California

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.