Wilwood Front Disc Brake Kit DynaPro With Plain Rotors V8 1965-1966/All 1967-1969

CJ's Part Number:
DBF249-V
From
$1,051.93
Only %1 left

Wilwood DynaPro Front Disc Brake Kit with Plain Rotors for 1965-1966 V8 Mustangs and all 1967, 1968 and 1969 Mustangs.

Restoring your classic Ford Mustang doesn't negate possible upgrades. If you're looking for more stopping power on the street or on the track, you need to check out this DynaPro Front Disc Brake Kit with Plain Rotors from Wilwood. Designed to fit 1965-1966 V8 Mustangs and all 1967-1969 Mustangs, this kit is fully compatible with both manual and power steering. All of the necessary installation hardware and components are included for your convenience.

Kit 140-13344 Features:
- 4 Piston Calipers with Piston Mounted Dust-Boots
- Black Anodized or Red Powder Coated Calipers
- 5 Lug Disc Brake Kit
- 12.19" Diameter Plain Rotors
- Made in the USA
- Complete Bolt-in Kit
- Fully Compatible With Manual Steering
- Fully Compatible With Power Steering
- Fits Most 15" and Larger Wheels

Please Note: This kit requires the purchase of additional front brake lines (BHS47).

This kit comes with 2-piece rotors that are merged with big brake series hats precisely manufactured from premium-quality aluminum alloys for ultra-strength and weight savings. The hats have threaded rotor mount holes and are dependable even in the most difficult conditions. The 12.19" diameter rotors feature a plain design for sleek styling. Dynapro 4-piston dust book calipers are made from aluminum with stainless steel pistons. They come in your choice of black or red for a custom look. Dust-booted aluminum pistons deliver added protection against road and track dirt and debris. This debris is present on low to intermediate temperature range applications that may also perform in harsher environments. This kit was specifically developed for applications or locations that require a dust-booted piston.

The included Wilwood smart brake pads feature smooth engagement with consistent response from a flat torque curve throughout the entire effective heat range. They have a medium-fiction compound with minimal noise and minimum dust, plus increased characteristics akin to a race compound brake pad. Forged billet calipers, 12.19" rotors and these brake pads generate big brake stopping power that work perfectly with wheel, tire and suspension upgrades on an array of custom show and performance vehicles.

Included Hardware:
- Pair of Caliper Brackets
- Bearings
- Seals
- Dust Caps
- Detailed Instructions
- All Necessary Installation Hardware

*This Brake Kit Has a Hub Offset of: +.09” (2.286mm)
*This brake kit is designed for use with 15” or larger wheels; please verify fitment before installation.

Order this Wilwood (140-13344) DynaPro Front Disc Brake Kit with Plain Rotors for your 1965 or 1966 V8 Mustang or your 1967, 1968 or 1969 Mustang from CJ Pony Parts today!

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account