Accelerator Cable with Manual Transmission 5.0 1986-1993

CJ's Part Number: ACC36
MSRP: $64.99
CJ's Low Price:
$62.99
1466899200 1495
Earn 62 RPM Points What's this?
Accelerator Cable with Manual Transmission 5.0 1986-1993
Accelerator Cable with Manual Transmission 5.0 1986-1993 Accelerator Cable with Manual Transmission 5.0 1986-1993 Accelerator Cable with Manual Transmission 5.0 1986-1993 Accelerator Cable with Manual Transmission 5.0 1986-1993 Accelerator Cable with Manual Transmission 5.0 1986-1993

Product Description

Accelerator Cable for 1986-1993 Mustangs with a Manual Transmission and 5.0L Engine.

This cable attaches the accelerator pedal to the throttle body. If your accelerator pedal is stiff then it is probably caused by a worn cable. The factory mounting points are used for a direct fit.

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Accelerator Cable with Manual Transmission 5.0 1986-1993 is rated 1.0 out of 5 by 2.
Rated 1 out of 5 by from terrible cable, waste of money I purchased this cable and waited nearly 3 weeks since it was on back order. when I finally got it installed it wouldn't open my throttle body all the way. the inner cable doesn't have enough travel. found a used cable and I'm back in business, except now I'm having to pay to ship this garage back to cj pony parts..thanks again for the quality parts.
Date published: 2015-08-06
Rated 1 out of 5 by from cheap I bought this product a bout 3 months ago never drive the car until last night 13 aug. 2015. The linkage connected to the throttle body broke. Very poor construction.
Date published: 2015-08-13
  • 2016-06-26T08:47CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_ACC36, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 6.39ms
  • REVIEWS, PRODUCT

Product Questions

will a throttle cable from a manual v8 efi fit a car with a automatic transmission v8 efi? thanks 

Asked by: marz68
No, they are different.
Answered by: CJPP Dave
Date published: 2016-06-24

do you have accelerator cable that will fit 66 v8 Mustang

Asked by: Hammy
We do offer the original style throttle rods for 4 bbl or 2 bbl carbs, http://www.cjponyparts.com/scott-drake-throttle-linkage-kit-4v-289-1965-1967/p/TRK21/, http://www.cjponyparts.com/scott-drake-throttle-linkage-kit-2v-289-1965-1967/p/TRK20/ .We offer this cable,http://www.cjponyparts.com/lokar-accelerator-cable-stainless-steel-36-universal/p/ACC35/, which must be used with Lokar pedals (AL9/AL10) and Lokar carb. bracket (SRK4000).
Answered by: rk cjpp
Date published: 2016-06-03

well it work with a aod

Asked by: biggall64
No, it only works on manual transmission Mustangs.
Answered by: CJ Pony Parts
Date published: 2015-09-09

the cable is ay shorter than mine,was it longer originally?

Asked by: catman
No - it's the same length as the OEM. Your original one probably stretched out so it seems longer, but it didn't start that way.
Answered by: CJ Pony Parts
Date published: 2015-08-21

Will this fit a 91 with a AOD.  70mm tb. My pedal is floppy and almost in the floor. 

Asked by: Jacob 501996
No, this only fits manuals.
Answered by: CJ Pony Parts
Date published: 2015-07-20

what cable should i use on my 1992 5.0 AOD equipped mustang, if this is for manuals only? 

Asked by: markm

Will this fit a 87 mustang with 351w and a t5 trans? How long is the cable

Asked by: Nickf
  • 2016-06-26T09:23CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_ACC36, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 6.01ms
  • QUESTIONS, PRODUCT

You Might Also Like