Heater Blower Motor with Cage for 1965-1968 Mustangs without Air Conditioning.Don't let the lack of heat keep you from driving your classic Mustang all year round. This 3-speed heater blower motor will replace a damaged heater blower motor in 1965-1968 Mustangs without air conditioning.
*Motor uses 2-wire connection.
Product ReviewsWrite a review
Heater Blower Motor With Cage 1965-1968 is rated out of 5 by 8.
Rated 3 out of 5 by Jefferson from Blows like a hurricane This certainly met my overall goal: real heat in Colorado winters. My original motor was on its last leg and I wanted the air velocity of a modern car. However, it comes with the wrong connectors for a stock wiring harness. Go ahead and find some 16-14 gauge male bullet connectors and cut these off. I also had one of the four mounting bolts snap clean off with little effort on tightening. A mixture of improvement and disappointment.
Date published: 2015-02-14
Rated 4 out of 5 by goerbear from Good replacement. Couple of things, check wiring and wheel rotation before the motor is installed in the heater box as the wire color is different than stock. This came painted ready to install but without the thick donut gasket that mounts between the flange and firewall.
Date published: 2015-08-28
Rated 1 out of 5 by Bakerb from My first one is a bust! I'm not sure if I received a defective unit or not. Blower worked fine during testing but after my first Drive it sounds terrible. I just emailed customer service to see what can be done to fix it
Date published: 2016-03-13
Rated 1 out of 5 by Jwhinch from Bad motor I bought this for a 68 I was redoing and the bearing was bad and the first motor. I had to adjust the squirrel cage several times as well and the welded on flange didn't fit properly
Date published: 2016-04-07
Rated 4 out of 5 by Yosamitiesam1 from Fitted the replacemen HBA367-68 W/O A/C HEATER BOX Motor assembly fitted without any clearance or catching issues. Looks to be of good quality although the connectors on the wiring need doing but this is an easy job.
Date published: 2015-11-16
Rated 4 out of 5 by onefastback66 from Good value I usually don't need heat or defroster, but if I do this will help. Fit is good, just wish the wiring connectors were there and oem style.
Date published: 2016-03-12
Rated 5 out of 5 by Jerry from Perfect Easy to install and works fine. Had to crimp the wire connections
Date published: 2016-03-31
Rated 4 out of 5 by oldtightwad from Fits the bill Much needed part to complete heater box repairs. Looks nice.
Date published: 2015-10-06
what is the size of squirrel cage width, height, bore size
This blower motor has a black and blue lead. Wiring harness has yellow and brown. Which is negative?
You Might Also Like
CJ's Low Price:$13.99
By Bill Tumas: We’re here with a replacement heater motor assembly for your 1964 through 1968 Mustang. This heater motor assembly will fit all '64 through '66 Mustangs and will work on '67s and '68s when not equipped with factory air conditioning. The assembly includes the wiring, the new motor with the mounting studs, as well as a new squirrel cage. All of our heater motor assemblies are pretested by the manufacturer and come ready to install.