Scott Drake 2.25" Polished Fan Spacer for 1965-1973 Mustangs.One of the first upgrades made to most classic Mustangs is a larger radiator to improve cooling. The problem however, is most stock fan spacers are too long to accommodate the new thicker radiator. Since used short fan spacers are very hard to come by. Most have had to go with an aftermarket spacer that does not resemble the original spacer.
Scott Drake now has a simple affordable solution that will keep your classic Mustang looking factory fresh while still being able to run cool. This spacer is 2.25? long.
Product ReviewsWrite a review
Scott Drake Fan Spacer 2.25" Polished 1965-1973 is rated out of 5 by 1.
Rated 5 out of 5 by Timco from Good Replacement Rebuilding from the ground up and this was a great replacement. Scott Drake does it right.
Date published: 2015-12-04
Does this spacer come with mounting bolts? If not, can you recommend a hardware mounting kit that works for this fan spacer. Thanks
Use CJ part # HW2573. Hardware is not included with the fan spacer itself.
Date published: 2015-07-21
Will this spacer work with a 6 cylinder motor and an OEM radiator? Thanks.
It's meant to work with a larger, aftermarket radiator. It could work with the OEM setup, but that's not what it's designed to do. While I'm not sure how long the OEM spacer is, this one is a bit longer than the Scott Drake one and might be a better fit in a stock situation: http://www.cjponyparts.com/fan-spacer-2-5-aluminum-spacer/p/FANSP4/
Date published: 2015-03-25