Classic Performance Products Power Disc Brake Conversion With Granada Spindles Manual Transmission Mustang 1967-1970

Burdened by factory drum brakes? Want a method for direct replacement? Get rid of the archaic drums with this Power Disc Brake Conversion Kit (6770FBP-PM) from Classic Performance Products!

Features and Benefits:
- Four Piston Calipers
- Complete disc brake conversion
- Includes master cylinder
- Includes Granada spindles

This kit includes everything needed to swap out your front drum brakes for OE type front disc brakes originally available on '67-70 Mustangs. They are technically correct for '70-73 Mustang, but the '68- 69 OE differed only in that their spindles have a smaller pin. This kit uses the larger "boss" type pin used after 1969. The spindles use the Granada spec outer tire rod hole.

This Kit Includes:
- Granada Spindles
- Dust shield kit
- Caliper brackets
- Corrosion protected calipers
- Brake pads
- Brake hoses
- Hose brackets and attachment hardware
- Adjustable proportioning valve
- Residual pressure valve
- Master cylinder
- Master cylinder outlet adapter(s)
- Brake Booster
- An adjustable pushrod
- Wheel bearings
- Wheel seals
- Caliper attachment hardware
- Wheel attachment hardware
- Dust caps
- Performance slotted rotors with bearing races pre-installed
- Grade 8 attachment bolts

Please Note: You will need to adapt or re-fab your hard brake lines to accommodate the proportioning valve, the residual pressure valve, and the master cylinder.