Cobra Style Front/ Rear Brake Kit With Rotors Powder Coated Red Mustang 1994-2004

Building an all-round performer? Good brakes are essential for overall handling. For the SN95 Mustang, Ford designed Cobra front and rear brakes as a step above standard V6 or GT versions. Now you can install them on your Mustang too, with this Complete Front/ Rear Cobra Brake Kit! A direct fit swap for non-Cobra SN95s!

Features and Benefits:
- Superior overall braking performance and durability over V6/GT brakes
- high-heat powder coated
- pressure tested and thoroughly inspected for quality and safety
- Includes all new bleeder screws, hardware & pins
- Double disc ground finish
- 100% fully machined finish including rotor hats
- 100% inspected and mill-balanced

These Cobra calipers are a direct fit and add stopping power to your pony. These calipers bolt directly in place of the stock calipers, and look and perform great behind any wheel. The calipers and brackets are remanufactured in America and treated to a high-temperature red powder-coating. All new premium boots and seals are used, along with high-temperature silicone lubricant on the caliper pins for long life.

Hawk Performance brake pads are included in this kit - one step closer to giving you the greatest possible stopping power. Hawk Performance HPS-5.0 brake pads feature a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience.

StopTech rotors are also included. StopTech's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, StopTech's Vac-U-Slot helps push water off the braking surface for better stopping power.

Please Note:
- front calipers are a direct fit replacement for 94-04 Mustang Cobra models. Be sure to use the appropriate banjo bolt for your hose and caliper.
- When using these front calipers on a 94-04 GT or V6, you will need Cobra specific brake hoses and Cobra specific 13" front rotors.
- Requires use of 17” wheels
- These rear calipers are a direct fit replacement for 94-04 Mustang Cobra.
- These rear calipers and pads will work for 94-04 GT and V6 if paired with Ford racing M-2300-M

Vehicle Fitment:
- Fits 1994-2004 Mustang
- Fits Cobra, GT, and V6 models
- Requires use of M-2300-M caliper brackets for GT/V6 models