COMP Cams Camshaft Set Magnum 292H Hydraulic Flat Tappet 2500-6500 RPM 390/427/428
CJ's Part Number:
332404-V
Only %1 left
COMP Cams Magnum 292H Hydraulic Flat Tappet Camshaft Set with a 2500 to 6500 RPM Range for Mustangs with a 390, 427 or 428 Engine.
Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic flat tappet camshaft will fit 1963-1976 Ford FE engines including 352, 360, 361, 390, 391, 406, 410, 427 and 428 cubic inches.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
The Magnum 292H camshaft is for street/strip use. Good power is accompanied by a very rough idle. A 3000+ stall torque converter, low gears, intake, headers and 9.5:1 compression are recommended.
Camshaft Specifications:
- RPM Range: 2500 to 6500
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 292/Exhaust 292
- Duration @ .050" Lift: Intake 244/Exhaust 244
- Valve Lift: Intake 0.560/Exhaust 0.560
- Lobe Lift: Intake 0.323/Exhaust 0.323
Options Include:
- Camshaft Only
- Camshaft and Lifters
- Small Kit - Camshaft, Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
This hydraulic flat tappet camshaft will fit 1963-1976 Ford FE engines including 352, 360, 361, 390, 391, 406, 410, 427 and 428 cubic inches.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
The Magnum 292H camshaft is for street/strip use. Good power is accompanied by a very rough idle. A 3000+ stall torque converter, low gears, intake, headers and 9.5:1 compression are recommended.
Camshaft Specifications:
- RPM Range: 2500 to 6500
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 292/Exhaust 292
- Duration @ .050" Lift: Intake 244/Exhaust 244
- Valve Lift: Intake 0.560/Exhaust 0.560
- Lobe Lift: Intake 0.323/Exhaust 0.323
Options Include:
- Camshaft Only
- Camshaft and Lifters
- Small Kit - Camshaft, Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
Write Your Own Review
Complete Your Package
Might Also Like
CJ's Picks