COMP Cams Camshaft Set XFI Stage 3 For Naturally Aspirated Engines 5.0L 2011-2014
- Stage 3 Cams
- Naturally Aspirated Engines
- RPM Range: 1900-7200
- Intake 276/ Exhaust 283
You save 16%
COMP Cams XFI Stage 3 Camshaft Set for Naturally Aspirated 2011-2014 5.0L Mustangs.These billet hydraulic roller cams from COMP Cams unlock a major power upgrade for the 2011-2014 Ford 5.0L engine. Designed specifically for Coyote V8 applications, these camshafts are counter balanced and work with phaser limiters to produce optimum safe power.
The larger than normal lobe size on the Ford OHC is unlike any other cam-in-block engine, and the dangerous harmonics that come with these bigger lobes must be addressed for high performance usage. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive integrated counter balance design that cuts down on vibrations and reduces overall harmonics to ensure a smoother operating valve train that was properly engineered for high lift, long duration valve motion at high RPM.
The Ford 5.0L camshafts from COMP Cams are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are No Springs Required. Optimized race and street profiles give you the power where you need it most, whether that's maximized mid-range power and torque or increased top end horsepower.
-RPM Range: 1900-7200 (strong power gains above 5500)
-Duration: Intake 276/ Exhaust 283
-Duration @ 0.050" Lift: Intake 236/ Exhaust 239
-Valve timing: 0.006
-Lobe Separation (degrees): 126
-Intake Centerline (degrees): 129
-Valve Lash: Hydraulic
-Valve Lift: Intake 0.492/ Exhaust 0.453
-Lobe Lift: Intake 0.2440/ Exhaust 0.2260
*Requires phaser limiter kit & custom ECU programming.
How many Horspower wil bring this camshafts stage 2 or 3?
Unfortunately, we are not able to provide exact power gains for these cams as it would depend on the tune and other modifications you have done to your Mustang. But Stage 3 will show significant gains over Stage 2.
Date published: 2018-10-08
I have a brand new 5.0 coyote engine from AMS Racing. Everything is 302 boss stuff. I have new 302 boss heads. Will these work on my GT
Date published: 2018-08-13
Can these be used in a 2013 boss 302? Will they increase horsepower ?
Yes and Yes.
Date published: 2018-04-26
I'm not sure which cams to go with, other than the obvious numbers, is the stage 3 more aggressive than stage 1 and 2?
Absolutely, that's why it is Stage 3. They do not leave anything on the table with that level.
Date published: 2018-01-31
Can i install the cam comp mustang 5.0 for my f150 5.0 ?
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2017-02-14