Constant Voltage Regulator Mustang 1967-1968

CJ's Part Number:
HW1566
Constant Voltage Regulator 1967-1968 is rated 3.2 out of 5 by 6.
  • y_2020, m_7, d_3, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_HW1566, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 107.46ms
  • REVIEWS, PRODUCT

Highlights

  • Direct-Fit Replacement
  • Regulates Flow Of Current
  • Correct Plug Connector
  • Fits 1967-1968 Mustang
MSRP $33.99
$23.79
You save 30%

Constant Voltage Regulator for 1967 and 1968 Mustangs.

If you're replacing the dash gauges on your vintage 1967-1968 Mustang, then chances are you're looking to replace your old regulator, as well. Over time, this part can become worn out and can cause your dash gauges to stop working properly. This Constant Voltage Regulator features solid-state technology that allows for smooth gauge performance with no adjustments necessary! Original units used mechanical contacts that would open and close, which caused the dash gauges to fluctuate and require manual adjustment with a screwdriver. Thankfully, that problem is an annoyance of the past thanks to this Constant Voltage Regulator!

Features and Benefits:
- Solid-State Technology
- Provides Smooth Gauge Performance
- No Adjustments Necessary
- Lasting Durability

Vehicle Fitment:
- 1967-1968 Mustangs

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Solid state Didn't realize this at first, though it says it in the name. It doesn't pulse like an OEM so you'll be confused if you put a test light on it and expect the old behavior. But, I like it!
Date published: 2017-05-01
Rated 2 out of 5 by from Poor manufacturing Electrical connections held on with rivets. Rivet heads too small and elect connector pulled off, had to solder, hope it did not affect regulator. A replacement from you would have the same problem.
Date published: 2017-08-20
Rated 1 out of 5 by from Dash Volt Reg Piece of junk, 1 plug in fell off when trying to up plug it the first time. Not CJ Pony's fault, but manufacturer's.
Date published: 2019-06-05
Rated 1 out of 5 by from Cheap Part As noted by another buyer, electrical connectors are riveted. Barely touched it and it broke off. Very poor quality
Date published: 2019-03-01
Rated 5 out of 5 by from Received quickly works fine Shipped quickly and fit perfectly. Seems to work just fine.
Date published: 2015-12-18
Rated 5 out of 5 by from Easy and cheap fix I have gauges again. It was an easy fix and cheap.
Date published: 2015-10-25
  • y_2020, m_7, d_3, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_HW1566, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 8.22ms
  • REVIEWS, PRODUCT

have no dash lights 68 mustang

Asked by: tropa
The constant voltage regulator is for the gauges, check for a blown fuse also the headlight switch has a resistor that controls voltage going to the dash lights.
Answered by: rk cjpp
Date published: 2015-10-13
  • y_2020, m_7, d_2, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_HW1566, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 136.52ms
  • QUESTIONS, PRODUCT