Corsa Cat-Back Exhaust System Stainless Steel 3" With Matte Black 5" Tips F-150 Raptor 2017-2020
Highlights
- 3" Mandrel Bent Tubing
- 5" Matte Black Tips
- Stainless Steel Construction
- Easy Installation
Corsa 3" Stainless Steel Cat-Back Exhaust System with 5" Matte Black Tips for all 2017-2020 F-150 Raptors.
If you love your new 2017-2020 F-150 Raptor but wish it had a bit more edge to it, than this Corsa 3" Stainless Steel Cat-Back Exhaust System with 5" Matte Black Tips may be exactly what you need! Pick up your new aggressive exhaust system from CJ Pony Parts today!
Corsa Cat-Back Exhaust (14397BPC) Features and Benefits:
- Full 304 Stainless Steel Construction
- Dual Rear Exhaust Exit Design
- Dual 5" Pro-Series Matte Black Tips
- Includes All Necessary Hardware
- Flows 11.15% Better Over Stock Exhaust
- Almost 9 lbs. Lighter Than Stock Exhaust
- Custom Tuned for Aggressive Exhaust Noise
- Easy Bolt-On Installation
- Patented RSC Technology
- Aggressive Sound Under Acceleration
- Drone-free at Cruising Speeds
- Perfect Direct-Fit Upgrade From Stock Exhaust
If you're looking to increase power and save weight, Corsa's cat-back is able to provide both. With a 11.15% increase in flow over your F150 Raptor's stock exhaust, the Corsa cat-back is guaranteed to increase power. The entire cat-back system from Corsa weighs in 9 lbs. lighter than the factory exhaust which is a much need improvement for the big truck. This upgraded exhaust system is a direct-fit to your OE stock system and will be an easy bolt-on installation that doesn't require any welding. You'll love the loud, aggressive roar this larger system provides, and the dual 5" matte black tips will add a bit more style and personalization to the rear of your Raptor. Corsa takes pride in their premium-quality stainless steel construction, so you know it'll be durable enough to last for years to come. What are you waiting for? Order your upgraded cat-back from CJ's today!
Vehicle Fitment Note: This cat-back system will fit both SuperCrew and SuperCab 2017, 2018, 2019, and 2020 F-150 Raptors.
Corsa's exhaust systems are outfitted with their patented Reflective Sound Cancellation Technology. This technology was intended for an aggressive sound under acceleration and a drone-free occurrence during cruising. Every Corsa system is precisely designed for each application. Acoustic tuning hones and enriches the unique aggressive voice of your vehicle. Patented RSC technology terminates frequencies that cause unwelcome cabin drone. These unwelcome, low frequency sound waves are redirected through specifically designed channels and are reversed 180°. A state-of-the-art straight-through design boosts engine performance by reducing back pressure and increasing engine proficiency.
California Residents: Proposition 65 Warning
Related Categories: Ford F-150 Raptor Parts, Ford F-150 Parts, F-150 Raptor Exhaust, F-150 Raptor Cat Back Exhausts
Installation Videos
Video Transcript
The F150 Raptor is an absolute powerhouse of a truck, but the factory exhaust is a bit too quiet and restrictive. So, today we're going to be installing this Corsa Cat-back exhaust on our 2017 F150 Raptor. This Corsa Cat-back exhaust is designed to be an easy, direct-fit replacement for the factory exhaust. It's made of high quality mandrel bend 304 stainless steel tubing, with a flare muffler, and gets finished off with a pair of five inch matte black tips for a custom look. So today we're going to install it on our 2017 F150 Raptor.
Tools you'll need for this installation: a lift, or a jack and jack stands, 10 millimeter socket, 3/8 ratchet, 15 millimeter socket, 1/2 inch ratchet, 10 millimeter wrench, and you might need a hammer.
To install this Corsa Cat-back exhaust, we have to remove the muffler and tailpipes. We're going to start off with the muffler. To remove the tailpipes, you, you need to remove the brackets that secure it, by removing the two 10 millimeter bolts. Remove the bracket on the other side. Then remove this bracket for each tailpipe and the tailpipes can be removed.
The factory muffler can now be removed. This sleeve clamp off the factory muffler needs to be removed. In order to remove it, you need to pry up on this metal tab right here with a flat head screwdriver. Then slide it off. Okay, we have the factory system completely removed, now we can install our new Corsa muffler.
To install this muffler, we're going to slide it into these front pipes on the resonator, and this hanger. The hanger back here, we're going to have to remove to slide it on to the muffler. Slide the sleeve clamp into place. Remove the bolt holding on this hanger. Slide it out. Slide it on the exhaust, and reinstall it. Slide a clamp over each outlet on the muffler. Install the passenger side outlet pipe, then the driver side outlet pipe.
Take the hanger from the passenger side tailpipe, and install it onto the Corsa pipe. And you can install your hardware to secure it. Remove the hanger from the driver side tailpipe, and install it onto the Corsa pipe. And then install your hardware on the bracket like you did for the other side. Finally, install your tailpipes onto the over-axle pipes with the provided clamps. Then don't forget to install the bracket on the very end.
Install your bracket at the end of the tailpipe with the hardware. Once you get the bracket on, tighten down the hardware. Do the same thing for the other tailpipe. Then you can go back and tighten all your clamps. Okay, we have the exhaust fully assembled now. We're going to come back up front, tighten all the clamps, and work our way back.
Finally, install your tips, and your installation is finished. Alright, let's hear how it sounds. Okay, we got our Corsa Cat-back exhaust installed. It's a lot louder, and sounds a lot more aggressive than the factory exhaust. And the black tips give you that factory look. And actually this installs easier than the factory system comes out. Installation should only take about an hour 45 minutes, to two hours. And before you know it, you'll be heading off road.
