Diode Dynamics LED Switchback Turn Signal With Side Marker Cool White Front Kit 2015-2017

Diode Dynamics:
DD0227
Rating:
95% of 100

Highlights

  • Plug And Play Kit
  • Includes 4 LED Bulbs
  • Complete Kit
  • Designed In The USA
MSRP $90.00
$89.95
You save $0.05
Earn
points.
Product Description

Diode Dynamics LED Switchback Turn Signal Bulb and Cool White Side Marker Kit for the Front of all 2015, 2016 and 2017 North American-Spec Mustangs.

With this kit, you can easily convert the front end of your 2015-2017 North American-Spec Mustang to a cool white all-LED modern appearance. This 4-piece kit from Diode Dynamics will fit all North American-Spec models of the 2015-2017 Mustang including the Ecoboost, V6 and GT Fastback and convertibles.

Included is a pair of front turn signal bulbs which are "switchback," a unique and very special design. When this bulb is in its normal on position with your parking lights or headlights, it shines a nice, pure white color. But when you activate your turn signals, it flashes bright amber. Offering you two colors in one bulb, for an awesome lighting effect! You will also receive a pair of cool white LED bulbs to replace your factory front sidemarker bulbs. These bulbs are specially designed to distribute light fully in your housing, for a uniform, full appearance and will match perfectly with the included switchbacks.

Diode Dynamics LED Switchback Turn Signal Bulb and Cool White Side Marker Kit DD0227 Features and Benefits:
- Easy Plug and Play Installation
- Kit Includes 4 LED Bulbs Total
- Every Bulb Needed to Convert the Front Lighting
- Fits ALL 2015-2017 North American-Spec Mustang Models
- Designed in the USA

Please Note: Will NOT fit models that are manufactured for sale outside of North America.

Installation for both of these bulbs are 100% plug-and-play. You do not need to do any wiring or splicing, just remove your existing bulbs and replace with these new LEDs. Even the removal of the OE bulbs couldn’t be easier and should only take you a matter of minutes with no permanent changes necessary for install. Due to the circuit design found in the 2015-2017 Mustang, you do not need resistors to slow down blinking speed. Your indicator in the dash will blink at a different rate, but your exterior turn signals will always blink at the standard speed.

Order this Diode Dynamics DD0227 LED Switchback Turn Signal Bulb and Cool White Side Marker Kit for the Front of your 2015, 2016 or 2017 North American-Spec Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Lighting, Mustang Bulbs

Installation & Fitment

Installation Videos

Video Transcript

Thanks to these unique tri-bar LED headlights, when you see one coming down the road, there's no doubt you're looking at a 2015 Mustang. Unfortunately, in my opinion, the amber mark lights still take away from the look. Ford finally gave us a clear marker light, which looks great on this car, but since an amber light is required for the turn signal, sticking a white LED in there really isn't an option. Thankfully, due to today's technology and LED lighting, you can have the best of both worlds, a white marker light and an amber turn signal.

Today we're going to show you how to install an LED switchback marker light kit, using out 2015 EcoBoost Mustang. This is a switchback LED marker light kit. It's going to include four bulbs, as there are two per side. The larger bulb does your turn signal and marker light and this is the additional marker light here. The beauty with these, is they use an aluminum heat-sink, want to put a much brighter LED so you get a really bright light, but as you can see, you have both amber and your clear, which is what makes it legal. This second bulb here, the design of this LED is going to disperse light really brightly, give it a nice, even look within the marker light lens.

To access the marker light assembly, what you'll want to do is remove the three clips here that hold the splash shield in place. Once we do that, we can actually push the splash shield aside and reach in and grab the bulbs. The only tool needed for this installation is a small screw driver or a small pick. You don't have to put the car up in the air, either, you can easily do this on the ground. I only put it up in the air so you can see it better.

The two we're going to be removing are this gray plug right here and this brown plug here. We'll start with the gray one. Just get a grip on it and turn it counterclockwise and pull out to see the bulb. Just get a grip on the bulb, pull it straight out. Now we'll grab our LED. We'll plug the LED in. It will be a tight fit, which is good, you don't want it to short out. Plug it in, put it back in, turn it clockwise, and put it back in place. It doesn't matter which way you put the LED in, it'll work in both directions. Tighten it up, clockwise lock in place.

Same process with the brown one. Get a grip on it, counterclockwise to remove it, and pop out the bulb. When you grab the LED, make sure the contacts are straight and match up with the contacts on the factory bulb before you install it. Then same process, line it up and install. Put it back in the housing and turn it clockwise to tighten it in place. Before you replace all the push-pins you want to check it and make sure everything's working properly. To check it, simply hit "disarm" on your keypad. When you hit "disarm," it lights up the turn signal first along with the marker, and then the whole marker lights up. If installation is correct, reinstall the plastic trim panel and repeat the process on the other side.

One thing we do want to mention, is your turn signal inside your car will click a little bit differently than it did before. These don't use any kind of a resistor so you get a double-click, then a single-click; that is perfectly normal, it's the way these lights work. There is an additional wire harness available if that bothers you, but most people it's not going to bother at all.

The LED switchback marker light kit's a great way to finish off the lighting on the front of our 2015 Mustang. Now the markers match the rest of the lights and the amber turn signals look killer as well, on our car. As I showed you, the installation is very simple, will take you a few minutes per side, to be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews 95
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart