Drake Muscle Cars Sway Bar End Link Adjustable Rear Pair Mustang 2015-2024
Highlights
- Teflon/Ptfe Chromoly Ends
- 7075-T6 Billet Aluminum Sleeve
- Red Anodized Finish
- Sold as a Pair
Pair of Drake Muscle Cars Adjustable Rear Sway Bar End Links for 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and 2024 Mustangs.
This Pair of Drake Muscle Cars (FR3Z-5A972-A) Adjustable Rear Sway Bar End Links are constructed with absolute precision to ensure a proper leveling of the rear sway bar on your lowered 2015-2024 Mustang!
Features and Benefits:
- Long-Lasting Teflon/PTFE Lined Chromoly Rod Ends
- Delivered with Necessary Mounting Equipment
- More Fortified than Non-Adjustable OEM Links
- 7075-T6 Billet Machined Adjusting Sleeve
- Killer Red Anodized Finish
- Driver & Passenger Pair
- Quick/Simple Install
Please Note: This pair of Adjustable Rear Sway Bar End Links are for the rear sway bar only. For the pair of Adjustable Front Sway Bar End Links, see P/N: EL10.
Empower the performance of your lowered S550 by taking your build a step further and including sway bar end links that are built to optimize your overall experience! With these high-end end links, true excellence will show whenever you're enjoying some spirited driving on winding backroads, or perhaps you're a competitive driver who likes to feel the rush of the finish line?! There's no better way to get there with your lowered pony than by ensuring absolutely correct sway bar alignment with premium end links like these! Here at CJ's, we want you to drive with confidence, so get ready to take turns with a commanding force like never before when you upgrade today!
These adjustable rear sway bar end links are produced by Drake Muscle Cars, a division of Scott Drake. For street use, these top-of-the-line end links are as silent as the OEM units and will not add obnoxious noise, vibration, and harshness (NVH) like non-performance focused rod end units. For competitive usage, Drake Muscle Car’s double adjustable center design allows for full adjustability while the end link is still on your Mustang! Retain absolutely correct sway bar geometry on your lowered Mustang and adjust the sway bar pre-load for fine-tuning with this premium upgrade!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Suspension, Mustang Sway Bars, Mustang Sway Bar Bushings & End Links
Installation Videos
Video Transcript
These Adjustable Sway Bar End Links from Drake Muscle Cars are designed to work with your stock bar, but will work with aftermarket bars as well. They have the same steel and billet construction with the red anodized center as the front ones do and allow us the same adjustability with the rear as well as being much stronger than the factory components.
For this installation today, lift or a jack and jack stands, a 3/8 ratchet, a 19 millimeter socket, six millimeter Allen key, 16 millimeter wrench, 17 millimeter wrench, and an 18 millimeter wrench.
Installation is pretty straightforward. You get the car up in the air, remove the wheel, and then we're gonna remove the end link back here. We need an Allen key to hold the stud in the middle and use a wrench to take them off.
For the top part, just be leery of this bracket here. It actually will separate once you remove the nut, so make sure you put it back in the same spot with the new end links.
What we're gonna do now is actually adjust the Drake one's so they match up with the stock ones. We're gonna go with that for our stock setup is to properly dial in these Rear Sway Bar End Links. You want to have the car loaded so it's suspension's on the ground. And again, the benefit here is you can adjust the pre-load on the bar and if you are going coil over and going pretty serious with car, you'll need these dialed in properly. Once their adjusted, we're ready to install them on the car.
All right we'll put this sway bar end link up into place and then install it with the provided hardware. We got to make sure the brake bracket's installed exactly as it was with the stock piece.
With the bolts tight, now we're gonna tighten up the jam nuts. All right, you wanna repeat the process on the other side, reinstall your wheels and your installation's finished.
The Drake Muscle Cars Rear End Links are the perfect complement to the fronts and allows us to down the geometry of the sway bar just like on the front. As far as the installation goes like we showed you, it's pretty straight forward. Should take you around an hour and be back on the road in no time.
