Flaming River Rack And Pinion Manual Steering Cradle Kit With Column Right Hand Drive Small Block V8 1965-1970

CJ's Part Number:
FR329RH-V
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 129.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
From
$1,881.99

Flaming River Right Hand Drive Manual Steering Rack and Pinion Cradle Kit with a Steering Column and Manual Steering Pump for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with a Small Block V8 Engine.

Upgrade your factory right hand drive Mustang or convert your left hand drive Mustang using Flaming River's Right Hand Drive Manual Steering Rack and Pinion Cradle Kit. Do away with the vague steering feel of the factory steering setup and gain full control of your 1965-1970 Mustang. Flaming River's manual steering kit provides a modern driving feel and comfort, especially when parked.

Flaming River's patented cradle is a bolt-on part that adapts a rack to your 1965-1970 Mustang without any permanent modification. The cradle utilizes the factory steering box and idler arm bolt holes in the frame. No chassis or suspension modification is required meaning you can remove Flaming River's rack at any time.

Power Rack Kit Includes:
- Patented Rack and Pinion Cradle System
- Paintable or Polished Tilt Column
- Shaft Support Bearing
- Grade 8 Mounting Hardware
- Wiring Connector
- Universal Joints

To eliminate any problems and the use of worn parts, Flaming River uses brand new steering racks. The beefy manual steering rack uses a strong and durable one inch diameter rack gear. Steering performance is increased with more than six inches of steering rack travel. This means you gain an improved full-turning radius and true steering performance. All you need to do is attach your factory outer tie rods to the included inner tie rods.

Kit includes your choice of paintable stainless steel column or polished stainless steel column that will accept the factory Ford style steering wheels.

Made in the USA!

Order this Flaming River Right Hand Drive Manual Steering Rack and Pinion Cradle Kit with a Steering Column and Manual Steering Pump for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang with a Small Block V8 Engine today from CJ Pony Parts.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.41ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 118.63ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;