Ford Performance Driveshaft Yoke 31 Spline T-45/C-6/Tremec 3550/3650 1996-2004

Ford Performance:
M-4841-A
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 121.04ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Fits 31 Spline Output Shafts
  • Uses 1330 U-Joints
  • U-Joint Cap Diameter 1.062"
  • U-Joint Width 3.5"
MSRP $109.00
$91.00
You save 17%

Ford Performance 31 Spline Driveshaft Yoke for 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a T-45, C-6, Tremec 3550 or 3650 transmission.

Continue updating the performance output of your 1996-2004 Mustang by purchasing this 31 Spline Driveshaft Yoke from Ford Performance. Specifically designed for use with production T-45, C-6, 3550 and 3650 transmissions, this driveshaft yoke will rotate the u-joints that are connected to the driveshaft, which will rotate to send power to your SN95's rear end.

Features and Benefits:
- Designed to Fit 31-Spline Output Shafts
- Outer Diameter of 1.685"
- Uses 1330 U-Joints
- U-Joint Cap Diameter of 1.062" with a width of 3.5"
- Made in the USA

Ford Performance’s M-4841-A 31 driveshaft yoke is specifically designed to fit 31-spline output shafts. Completely American made, this driveshaft yoke will increase your SN95's horsepower by helping reduce your drive train weight. The yoke has an outside diameter of 1,.685" along with a machined area length of 6.068". Ford Performance manufactures this yoke to use 1330 U-joints that have a width of 3.5" and a cap diameter of 1.062".

Will only fit 1996-2004 Mustangs that have a T-45, C-6, Tremec 3550 or Tremec 3650 transmission.>

Please Note:This will also fit 1986-1993 Mustang with a 5.0L Engine that have swapped to a Tremec TKO transmission or C6 transmission using a 1330 style u-joint.

When you purchase items from Ford Performance (formerly Ford Racing) at CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination!

Order Ford Performance's M-4841-A 31 Spline Driveshaft Yoke for your 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a t-45, C-6, Tremec 3550 or 3650 Transmission from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.91ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

03 mustang GT(manual trans) my rear trans leaked while I drove and sprayed trans fluid through out the bottom because of my driveshaft. I replaced the outputseal and its still leaking but slower. will this product correct my issue? 

Asked by: Maurice GT 03
Its possible if the shaft is worn.
Answered by: rk cjpp
Date published: 2017-12-19

Will this driveshaft yoke work for my TKO 600 transmission in my 1971 ford mustang? Thanks

Asked by: Bostang351
No it will not.
Answered by: rk cjpp
Date published: 2017-11-21

I mic'd my cups and they come to 1.065 on the old yoke. The drive shaft was connected to an auto trans I'm replacing it with a 5 spd manual trans will this yoke work on this drive shaft

Asked by: bobdicke
You would have to check how many splines the output shaft on the transmission has, without knowing what the 5 speed you are using I wouldn't be able to answer your question accurately.
Answered by: rk cjpp
Date published: 2017-01-04
  • y_2020, m_1, d_25, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_M4841A, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 136.87ms
  • QUESTIONS, PRODUCT