Does your 2013-2018 Ford Focus ST or 2016-2018 Ford Focus RS need a new addition to its braking system to allow for superior stopping power in race, track, and club events? With the ability to double expected brake pad life, this set of Hawk Performance HP Plus Rear Brake Pads (HB896N.568) from CJ Pony Parts will inject a high friction coefficient that stays cool and ready for use in any scenario!
Features and Benefits:
- Complete rear set for driver and passenger sides
- Extremely high friction coefficient
- Fade-resistant Ferro-Carbon compound
- Suited for Autocross, Track, and Club racing events
- High torque value with a low wear rate
- Doubles expected pad life and decreases rotor wear by 82%
- Proudly made in the USA!
These HP Plus Rear Brake Pads will ease your mind when enhanced stopping power is an essential aspect of your racing abilities! They are made with a unique Ferro-Carbon compound that can stand up to heavy braking that causes intense heat. Their HP+ compound will resist fade and decrease rotor wear by 82% so your new pads can last twice as long as your old ones. They also offer a high torque value with a low wear rate that further increases life expectancy. They also remain quieter with less dust, improving modulation. These Hawk Performance HP Plus Rear Brake Pads (HB896N.568) are proudly made in the USA!
Tech Tip: Hawk Performance burnishes its brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
Please Note: Due to the significantly high friction levels produced to achieve race-level braking, dust generation, rotor wear, noise while braking and pad life may be affected.
- 2013-2018 Ford Focus ST
- 2016-2018 Ford Focus RS