Lower Cowl Repair Panel Driver Side Mustang 1965-1968

CJ's Part Number:
M136L
Rating:
96% of 100

Highlights

  • For 1965-1966 Mustangs
  • Measures 15-1/2" X 18"
  • Stamped Steel Construction
  • Fits Driver Side
$80.49

Driver Side Lower Cowl Repair Panel for all 1965, 1966, 1967 and 1968 Mustangs.

If the driver side lower cowl area in your vintage 1965-1968 Mustang is leaking water when you drive it through rain or wash it, then it's probably time to get a Driver Side Lower Cowl Repair Panel, like this one from CJ Pony Parts! This panel will weld into place after you cut out your old one.

Features and Benefits:
- Driver side specific
- 15-1/2" x 18"
- Welds into place
- Stamped steel construction
- Sold individually

This Driver Side Lower Cowl Repair Panel measures in at 15-1/2" x 18". It's specific to 1965-1966 Mustangs because of the mounting studs for the fresh air vent that will mount below it. The studs will fit the vent on 1965-1966 Mustangs but it won't fit 1967-1968 Mustangs unless you drill additional holes in the vent. You'll install this Driver Side Lower Cowl Repair Panel by first removing the upper cowl panel on the driver side and drilling out the spot welds. Then you'll weld this panel into place after cutting out the old one.

Please Note: If you have a 1967-1968 Mustang and don't wish to drill holes in the vent, please see CJ Pony Parts # COWL3. This is a one-piece lower cowl made for 1967-1968 Mustangs.

Vehicle Fitment:
- 1965-1968 Mustang

California Residents: Proposition 65 Warning

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Installation Videos

Video Transcript

We're here with lower cowl patch panels for your '64 through '68 Mustang. The lower cowl area around the hat here is probably one of the most common places that early Mustangs rust out due to drain holes being blocked. These patch panels will weld in place in your lower cowl to repair the damage on your '64 through '68 Mustang. The panels come ready to weld in place with the bracket for your fresh air vent and a passenger side bracket pre-welded in place. If you're getting water in the floor of your '64 through '68 Mustang after washing it or when driving in the rain, there's a strong possibility that your cowl is leaking and these patch panels can be used to repair it.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart