National Throwout Bearing 289/302/351W/351C/390 V8 1965-1973

National:
614038
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 113.3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Designed To OE Specifications
  • Fits Manual Transmissions
  • For Diaphragm Pressure Plates
  • Made From High Grade Steel
$55.99

National Throwout Bearing for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289, 302, 351W, 351C or 390 Engine.

If your manual transmission in your 1965-1973 Mustang isn’t working properly, check out the throw out bearing and see if the fingers on your pressure plate are working properly which disengages the clutch.

National uses premium materials and a precise manufacturing process that results in consistent reliability. This classic bearing design matches the OE specifications of the original throw out bearings used in 1965-1973 Mustangs. This new throw out bearing from National will keep the clutch lever moving smoothly and functioning properly, so there is no second guessing that your clutch is engaged correctly. Also, high grade steel is used in the fabrication process that will ensure rugged durability and a trusted, long lasting performance.

Please Note:  This throw out bearing is designed for use with diaphragm style pressure plate, will not work with 3 finger style.

This National Throw Out Bearing will fit all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973 V8 Mustangs which fits directly in place to aid in keeping all the components of the clutch moving and rotating. However, this throw out bearing will not fit any big block engine sizes from 1965-1973, such as the 427, 428 and 429.

If you are removing and installing a new clutch kit, it is recommended that you replace the throw out bearing at this time. This can help you avoid the headache of having to tear apart the entire transmission when a malfunctioning, broken or missing throw out bearing is discovered down the road.

Purchase your National Throw out Bearing for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289, 302, 351W, 351C or 390 Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Is this Bearing intended to spin all the time or should there be a gap between PP-finger and bearing?

Asked by: Allan
There should be a very small gap with this type of bearing.
Answered by: rk cjpp
Date published: 2020-04-01

HOW DO iI CALL YOU TO ORDER. I HAVE Qs. THANX SCOTT

Asked by: SCOTTI
The phone number is 1-800-888-6473.
Answered by: rk cjpp
Date published: 2019-06-11

Could you please tell me what the diameter of the face of this bearing is, and if you would put this up against a pressure plate in a 86 mustang?

Asked by: Jeremy32
I would not use this on a 86.
Answered by: rk cjpp
Date published: 2016-05-31

Will this fit a 200ci?

Asked by: junn
No, it won't.
Answered by: CJ Pony Parts
Date published: 2015-12-11
  • y_2020, m_4, d_2, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_C1439, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 133.7ms
  • QUESTIONS, PRODUCT