Painless Performance Wiring Harness Pro-Series Key In Dash 25-Circuit

Painless Performance:
10414
MSRP $657.14
$574.99
You save 13%

Painless Performance 25-Circuit Key In Dash Pro-Series Wiring Harness.

Wire up your pro-touring or custom ride right the first time through with this Painless Performance 10414 25-Circuit Key In Dash Pro-Series Wiring Harness! With ample length provided for each circuit you have the freedom to route and/or hide your wiring anyway you choose while fitting your harness the way you want to.

Features and Benefits:
- Four H4 Headlight connectors to support single or dual action headlights
- Two Turn signal connectors- fits connectors found on factory GM hard wired turn signals
- Four Molded 1/4 sockets for front and rear marker lights
- Two HEI distributor connectors (+ and Tach)
- Two Connectors for factor GM wiper motor
- GM washer pump connector
- Courtesy light sockets
- GM headlight switch connector
- GM dimmer switch connector
- Gm brake switch connector
- GM turn signal switch flat connectors (early and late)
- GM ignition switch connectors
- Neutral Safety Switch connector (column mounted or factory floor shifter mounted)
- Reverse Switch connector (column mounted or factory floor shifter mounted)
- Braided ground straps (for body and core support to frame grounding)
- Alternator bag kit with terminals, splices, resistor, diode to connect the alternator
- Connector for GM 10si alternator
- Assortment of insulated and non-insulated splices, ring terminals, heat shrink, grommets, cable ties and cable tie clips

Featuring over 25 GM factory style connectors found on most ‘60s to early ‘90s GM switches, this harness utilizes LED ATC bladed fuses to get you away from the old hard-to-find glass fuses. The 6 gauge charge wire and midi fuse will keep up with today’s high amperage alternators, while the provided front and rear ground harnesses ensure an easy ground. Additionally, a GM Bulkhead style firewall pass through with the fuse block mounted inside the vehicle on the firewall is utilized. The included wires are pre-terminated using Packard factory crimping machines. Each wire is extra length with up to 20’ of length to the front and over 25’ to the rear ensuring you have enough wire to mount your fuse block with the freedom to route the wiring how you choose.

Included Circuits:
- A/C
- Heat
- Accessory (Fan Relay Activation, etc.)
- Backup Lights
- Brake Lights
- Charging
- Cigarette Lighter
- Dome / Courtesy Lights
- Electric Choke
- Electric Fuel Pump
- Emergency Flashers
- Fused Power Source
- Grounds for Front and Rear Lights
- Headlights
- Horn (Relay)
- Ignition Coil
- Instrument Panel Lighting and Gauges
- Park / Marker Lights
- Power Door Locks
- Power Windows
- Radio/Clock (Constant and Switched)
- Starting
- Tail Lights / License Plate Light
- Third Brake Light
- Turn Signals
- Wipers / Washer Pump

Included Wires:
- Fuel Gauge
- Oil Gauge
- Tachometer
- Temperature Gauge
- Voltmeter
- Amp Activation Wire

Vehicle Fitment:
- 1965-1969 Mustang
- 1960-1987 C10
- 1948-1979 F-100
- 1966-1977 Bronco

If you've ever done a wiring repair or replacement on your Mustang, you know the frustration that those projects can often cause. Wiring harnesses aren't the easiest to work with, and never go in painlessly, unless you order your wiring from Painless Performance. With more than 20 years of wiring experience and a reputation for being painless to install, the parts from Painless Performance are going to be exactly what you need.

Order this Painless Performance 10414 25-Circuit Key In Dash Pro-Series Wiring Harness today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.