Power Window Kit With Black Console Mount Switches Front Door/ Rear Quarter Windows Mustang 1971-1973

Add the luxury of power windows to your classic Mustang with this Front Door and Rear Quarter Power Window Kit featuring Black Console Mount Switches designed for 1971-1973 Mustangs! This kit comes with new power regulators featuring AC Delco motors for the front door windows and roll-up rear quarter windows, black illuminated double button switches that can be mounted to your console or dash, complete and labeled wiring harnesses, as well as conduits to protect the wires traveling through the doors.

Features and Benefits:
- Gear Plates Treated for Longer Teeth Life
- Bronze Oilite Thrust Bearings
- Regulators Made of 1018 Cold Roll Steel
- Hassle-Free Installation

You can count on these new power window regulators to last because they are built right here in the USA. They are constructed of 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points and feature treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. Each window regulator is equipped with a new AC Delco OEM motor, ensuring the highest of quality and performance every time you hit the switch.

Kit Includes:
- New Power Regulators (4)
- New AC Delco Power Window Motors (4)
- Black Illuminated Double Button Switches (2)
- Complete and Labeled Wiring Harnesses (2)
- Conduit (2)

The switches in this kit are intended for mounting to the console or dash, but can be mounted anywhere you desire. Each switch features a double button setup that will control two windows. The switches are black with white markings and can be illuminated with the correct wiring configuration. With complete and labeled wiring harnesses already attached to the switches, installation is as simple as finding a location to mount the switches, running the wires and you're ready to go!

The wiring harnesses come with all the wires labeled for correct positioning and are fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.

Additional Notes:
- We recommend using a kit with crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.
- Not for use on Mustangs with factory power windows.
- The power regulators for the rear quarter windows are only for 1971-1973 Mustangs that were originally equipped with roll-up windows.