Power Window Kit With Crank Handle Switches Front Door/ Rear Quarter Windows Mustang 1971-1973

CJ's Part Number:


  • AC Delco Window Motors
  • 4 Crank Style Handle Switches
  • Labeled Wiring Harness
  • New Power Regulators

Front Door and Rear Quarter Power Window Kit with Crank Handle Switches for 1971, 1972 and 1973 Mustangs.

Add the luxury of power windows to your classic Mustang while retaining the factory look by using your original window cranks with a custom Front Door and Rear Quarter Power Window Kit featuring Crank Handle Switches for 1971-1973 Mustangs. This kit comes with new power regulators that include AC Delco motors for the front door windows and roll-up rear quarter windows, power crank handle switches for original window cranks, a complete and labeled wiring harness, as well as conduit to protect the wires traveling through the doors.

Features and Benefits:
- Original Reproduction Handles
- New AC Delco Power Regulated Motors
- Power Crank Handle Switches
- Labeled Wiring Harness
- Made in the USA
- 1018 Cold Roll Steel Construction
- Bolt-On Installation

Convert from those tiring manual crank windows to a custom power window setup with power crank handle switches that are manufactured right here in the US! The 1018 cold roll steel construction includes bronze Oilite thrust bearings at all the pivot points and treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. The wiring harness comes with all the wires labeled for correct positioning and is fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.

- New Power Regulators (4)
- New AC Delco Power Window Motors (4)
- Power Crank Handle Switches (4)
- Complete and Labeled Wiring Harness (1)
- Conduit (2)

This kit includes power crank handle switches that are controlled by pushing down on the crank handle to lower the window and pulling up on the crank handle to raise the window. These crank handle switches mount behind the door panels and the rear quarter trim panels and allow the use of original window crank handles. The original window cranks mount directly on to the new power crank handle switches the same way they would mount on to the factory manual window regulators. There is no right or wrong position for the window cranks once installed on the crank handle switches; placement is entirely up to you.

Additional Notes:
- Not for use with factory power windows.
- The power regulators for the rear quarter windows are only for 1971-1973 Mustangs that were originally equipped with roll-up windows.

Tech Tip: We recommend using these crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account