Scott Drake Shorty Header 1-5/8" Black Painted Pair 289/302 1965-1970
Scott Drake Shorty Header 1-5/8" Black Painted Pair 289/302 1965-1970 is rated out of 5 by 6.
- High Temp Black Paint
- Ball And Socket Collectors
- Square Port Heads
You save 14%
Pair of Scott Drake Black Painted 1-5/8" Shorty Headers for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs equipped with a 289 or 302 Engine.
California Residents: Proposition 65 Warning
Rated 1 out of 5 by N4k3dNinj4 from GARBAGE! DO NOT BUY, GARBAGE! This product claims to bolt right up with no modification. I have a 68' with a 302, C4 trans and power steering. Once bolted up nearly impossible to get the sparkplugs in and once the plugs were in, the wires touch/laid the header. The left header rested directly on my power steering making it impossible to bolt to block. After being told they would not take this product back, I had the header dimpled to fit around power steering. After that hurdle my next problem was the collector. The collector stopped directly in front of the throttle linkage. Also the "Heat resistant paint" is a joke. I do not recommend this product.
Date published: 2019-03-26
Rated 1 out of 5 by Unhappy with headers from Powder coat burned off I purchased this item a few months back and installed on my mustang. The car ran about 4 hours and the powder coat burned off. Very disappointed
Date published: 2018-09-13
Rated 5 out of 5 by MSTRKLN from Fit and installation I bought these for my 1965 Mustang with a 289. The installation couldn’t have gone better. They needed to be installed from the bottom, which is normal. They fit like a glove! I didn’t have to modify motor mounts Or move any lines or hoses. They are built great, I can’t wait for spring to hear these headers!
Date published: 2017-12-21
Rated 3 out of 5 by ChrisRemis from Did not fit as advertised The product description originally said it would fit a 69 mustang manual transmission. Did not clear the equalizer bar. Had to return. Got my money back two weeks later after hours wasted installing just to find out the equalizer bar didn’t clear. CJ re wrote the description after later finding out it doesn’t clear the equalizer bar. Overall quality looked great. Would definitely buy these again if I ever went to cable or hydraulic clutch.
Date published: 2019-05-17
Rated 1 out of 5 by MSTRKLN from Poor quality UPDATE: I bought these a little over a year ago, still in the process of restoring car, only ran car in garage for a hour or so, the “High temp paint” flaked right off!! I guess you get what you pay for...
Date published: 2019-04-04
Rated 5 out of 5 by Terry351W from Good fit. Quality headers at a decent price. Bolted right in place on my 68 Cougar with a 351w.
Date published: 2018-04-17
O bought the scott drake shorty header 1-5/8 Wichi Dual Exhaust Kit i will need? I have the 1970 Ford Mustang coupe
You will need to make a custom set of down pipes and the exhaust of you choice.
Date published: 2019-06-02
I have a 1972 f 100 with a 1969 351w . looking for some headers
To find the headers we offer for your application. Beside the search bar hover the pointer over ford, than scroll down and click on f-100, a refine your search box will appear, choose your year in the drop down, in the type drop down choose headers.
Date published: 2019-03-19
will these fir a 289 Cobra
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2019-03-14
Will these fit a -67 Mustang 289 engine edelbrock e-street heads and T5 conversion with cable clutch and PS ?
As long as the heads are square port design the should fit.
Date published: 2019-03-06
I am converting my 68 Mustang GT fastback to a Borgeson integral power steering system, will these headers clear the new bigger steering box?
Yes they should.
Date published: 2019-03-05
Will these work with 302/AOD conversion?
We cannot confirm fitment with an aod.
Date published: 2019-02-08
I have a 65 coupe,289 4 speed Toploader with mechanical clutch mechanisms, will these fit? Or do I need a cable clutch? Would tri y headers be better?
Yes, they will fit.
Date published: 2019-02-04
I have a 64.5 mustang with a 289 , will the headers fit past my shock towers and with my stock 64 motor mounts. Thanks Jim Carini
These will fit but I would suggest updating the motor mounts to 66 and later mounts.
Date published: 2018-09-21
Complete Your Package