Scott Drake Shorty Header 1-5/8" Silver Coated Ceramic Pair Mustang 289/ 302 1965-1970
Scott Drake Shorty Header 1-5/8" Silver Coated Ceramic Pair 289/302 1965-1970 is rated out of 5 by 2.
- Performance Upgrade
- Silver Ceramic Coating
- 1-5/8" Primary Tubes
- Shorty Header
You save 10%
Pair of Scott Drake Silver Coated Ceramic 1-5/8" Shorty Headers for 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs equipped with a 289 or 302 engine.
California Residents: Proposition 65 Warning
Rated 5 out of 5 by 70 Coupe from Scott Drake Headers The fit and finish is great on these headers, the only negative I have is the brand tag welded on after the fact that may rust.
Date published: 2018-03-03
Rated 4 out of 5 by smmbb15 from Great quality Fitted well, except if you have a flaming river power rack!. Well made but the drake ‘tag’ that is spot welded on afterwards looks cheap when compared to others such as Hedman.
Date published: 2019-05-05
Are the primary tubes really 12 gauge or is that a typo and they are actually 16 gauge?
The manufacturer lists them as 12 gauge.
Date published: 2020-04-15
Are these headers compatible with a Borgeson Power Steering conversion on a 67 Mustang?
They should fit, we recommend TRI-Y headers.
Date published: 2020-04-09
do you sell down pipes for these headers
You would have to have custom pipes made.
Date published: 2019-10-02
will these fit with a 351w
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2019-07-23
I have 1965 mustang 289 manual transmission with the Z bar for the cluctch. Will these work with out having to replace the Zbar set up
1967-1970 Mustangs with a manual transmission will need to have the clutch equalizer bar modified.
Date published: 2019-06-24
Are these made from stainless steel? Are they coated with silver ceramic inside and out?
The manufacturer has not provided the material these are made of, they are only coated on the outside.
Date published: 2019-04-15
Will they fit a 67 with a 289 with automatic transmission ?
Date published: 2019-03-21
I Have a 65" Mustang Coupe, with a Fresh 302 Crate Engine, C4 Auto, and Power Steering, Will These Shorty Header Work with This Setup I've Mentioned.
They will fit except for. These Shorty Headers will NOT fit late-model 302 engines with P-Series Heads. When you install these Scott Drake Shorty Headers on a 1965-1966 Mustang, you may need to install 1966-1970 motor mounts or install 1/4" spacers on the stock motor mounts for proper clearance.
Date published: 2019-08-17
Complete Your Package