Seat Track Assembly 1965-1968
CJ's Part Number:
ST1
Seat Track Assembly 1965-1968 is rated
out of
5 by
19.
Highlights
- Fully Assembled
- Metal Construction
- Black Painted Finish
- OEM Style Replacement
MSRP $61.16
$59.99 You save $1.17
Seat Track Assembly for all 1965, 1966, 1967 and 1968 Mustangs.
Is your seat not adjusting properly? Replace your worn out or broken original seat track with this reproduction Seat Track Assembly!
Features & Benefits:
- Comes Fully Assembled and Ready to Install
- Includes Both Rails, the Knob, the Adjuster and the Spring
- Made out of Metal and then Painted Black
- One Track Fits One Seat; Fits Either Driver Side or Passenger Side
- Attractive Reproduction of the Original
- Direct Fit Replacement
This Seat Track Assembly is just what you need to replace your old and rusty seat track assembly! It comes fully assembled and ready for you to install. You'll get both rails, the knob, the adjuster and the spring. This attractive reproduction of the original is a direct fit replacement that's made out of metal and then painted black.
One Seat Track Assembly will fit one seat, and you can use it on either the driver side or passenger side. Your Mustang will require two of these seat track assemblies if you want to do both sides.
Please Note: This Seat Track Assembly does NOT come with the necessary mounting nuts and bolts. You will have to order those separately. Please see HW252 and HW518.
Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!
Order a Seat Track Assembly for your 1965, 1966, 1967 or 1968 Mustang from CJ Pony Parts today!
Rated 5 out of
5
by
Timco from
Easy Installation
When I pulled the seats on my '65 Hurricane Katrina victim I couldn't get anything to work; all completely rusted. These arrived promptly and fit the new seat bottom frames I got from CJ perfectly. Only thing is to remember to order the bolts to attach to your frame if the old ones are missing or unusable. It'd be nice if they were part of the package.
Date published: 2015-05-14
Rated 3 out of
5
by
RJ Westy from
Good for what they are
The sliders themselves work nice and are nice quality but I don't really like or trust the stock style slider linkage, but mine actually didn't work at all. The middle rectangular connection piece wouldn't hold the threads and they would slide out. I ended up just using picture frame wire and clamping it when it was completely taught and then taping middle together to get rid of the slack. Worked great and is definitely more durable.
Date published: 2019-01-05
Rated 4 out of
5
by
Mdough from
Nice Repro
Overall quality on this track assembly is solid. For the life of me, though, I don't know why they don't provide simple instructions for things like these. CJ's has a little writeup on restoring seats and assembly, but doesn't cover the install very well.
The actual rails are great quality and lined up nicely. The middle connection between is a little cheap, but works overall.
For install, the two rails get lined up with the levers facing towards the middle of the seat. Included will be a long metal screw and a black piece of metal that connect into this rectangular device that creates a pull and initiates the sliding mechanism on the non-handle side. To install, unscrew the silver side, but leave the black piece in the rectangular piece, with the circle end on the inside. Install the black side on the rail that has the handle. There will be 2 small circles near the handle. I inserted it into the bottom of the two. On the other rail, you will put the non-threaded side into the bottom of the 3 small circles. I had to use a small pick to pull the piece out (which activates the sliding mechanism) so I could put the end in that hole. From there, thread the silver piece into the other end of the rectangular piece until you have a nice firm pull on both sides.
the kit also comes with a spring, but I opted to not use it as I couldn't get it to stay in place. Just google the seat assembly and review images and you can clearly see where it goes, but I couldn't get a firm seating of the spring and it doesn't impact the sliding capabilities without it (though, to be fair, I don't have to move my seat after I found the position I'm going to use).
My two attached pictures show the ends of the pieces underneath of where they go, sorry for not getting better pics.
Overall, these are nice repro's and I would have given 5 stars if they just gave instructions instead of assuming anyone buying these is familiar enough or has the time test fitting until they get it right.
Date published: 2018-04-08
Rated 5 out of
5
by
68NGR8 from
Seat track assy.
I bought one in 2014, one of the best reproductions I've bought, definitely recommend this. Every thing is included, except mounting screws. Use the factory mounting screws, if you can, their best.
Date published: 2015-01-17
Rated 5 out of
5
by
Solo from
Great fit and finish
I bought this to replace my stock and the fit and finish was perfect. Great product.
Date published: 2015-04-12
Rated 5 out of
5
by
my67mustang from
Perfect replacement parts
When i went to redo my interior, neither front seat would adjust. Found that the drivers side right rail was rusted beyond repair or reuse and same for the passenger left rail. I bought just one assembly and easily replaced the bad rails, the new rails matched up with the old ones perfectly.
Date published: 2015-01-07
Rated 3 out of
5
by
Deacon from
Would be grewat but...
Bought this about a month ago and the bracket itself fit perfectly. I would rate this as a 5 star, but the small male end for the tension components was not included in my shipment. I had to sand, paint, and reuse the old one. Seems crazy since one end was included but missing the other. I didn't bother to call CJ Pony Parts as I was in a hurry to get the seat back in the car.
Date published: 2019-05-28
Rated 3 out of
5
by
Eric L from
Quality Product, but Needs Instructions
It would be great if instructions were included with this product. It was trial and error getting the bracket correctly mounted on the seat and in my car. The drivers side took several hours with lots of in/out. The passenger side took 20 minutes. Once in, the product works well adapting a wider slider mount to Mustang floor mounting holes.
Date published: 2016-11-14
will these seat brackets fit 65 comet
No, I purchased them in hopes they would fit. The bolts are off by 1.5”
65 Comet :)
Can be modified to work, but I wouldn’t recommend it.
Date published: 2019-10-06
will this work on the drivers and passenger seats? or is there a left and right?
Features & Benefits:
- Comes Fully Assembled and Ready to Install
- Includes Both Rails, the Knob, the Adjuster and the Spring
- Made out of Metal and then Painted Black
- One Track Fits One Seat; Fits Either Driver Side or Passenger Side
- Attractive Reproduction of the Original
- Direct Fit Replacement
Date published: 2019-08-30
will this work for a bench seat ,if so do you have the cable to go between them
They will work on a bench seat but we do not offer the connecting rod.
Date published: 2019-08-09
Looks very much like the seat track for my bench seat. Will these work on a 1965 Ford bench seat?
We only know these as fitting 65-68 mustang bucket seats.
Date published: 2018-11-07
this looks like the track for my 1964 Comet bench. Do you have a cross chart?
Sorry we do not.
Date published: 2018-05-01
Sir do you have seat track assembly for 2013 mustang 5.0L GT?TIA
No we do not.
Date published: 2018-03-14
Hello, Will this work w/ the Procar seats? If so, do I have to purchase the Procar adapter for this as well?
To mount the procar seat you would need a seat track adapter, https://www.cjponyparts.com/procar-seat-track-adapter-1965-1970/p/STP1/, the adapter will bolt to the procar seat tracks and the floor of your car.
Date published: 2018-03-12
Will this fix 1963 ford falcon bench seat
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Date published: 2017-07-19
Complete Your Package
Might Also Like
