Seat Track Plate Set Mustang 1965-1973

CJ's Part Number:
HW1513
Seat Track Plate Set 1965-1973 is rated 3.8 out of 5 by 4.
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 106.69ms
  • REVIEWS, PRODUCT

Highlights

  • Fits 1965-1973 Mustangs
  • Sold as a Set
  • Easy Installation
  • Factory Replacement
MSRP $10.58
$9.99
You save 6%

Set of Seat Track Plates for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

The seats in your Mustang are one place that takes some significant abuse from the driver and passengers. Make your new 1965-1973 Mustang's interior last forever with this Set of Seat Track Plates from CJ Pony Parts! Protect your pony's carpet from sharp edges and prevent unwanted wrinkles with these easy-to-install plates.

Features and Benefits:
- Full set of eight (8) heavy steel plates
- Stamped original-gauge steel
- Maintains space between carpet and seat tracks
- Protects metal of the seat tracks

This is a set of eight (8) heavy steel plates, stamped in the original gauge steel. This is just what you need to keep a space between the carpet and the seat tracks for easier seat adjustment. Mustangs with bench seats will only require four (4) plates, whereas front bucket seats require four (4) per side. These seat track plates keep the carpet on the floor separated and protected from the metal of the seat tracks. This set is a must-have if you're installing new carpet or seats to replace damage, stains, or tears.

*One set is enough for one Mustang.

Vehicle Fitment:
- 1965-1973 Mustang

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Rated 4 out of 5 by from Overall nice! I bought these because I lost one of my original plates. I decided to take the original plates to the wire wheel to remove any rust and debris and then repaint them black. When I misplaced one I bought these. The metal is a lot thinner and I had to paint these black as well but they would work fine. I just used one to replace the one I misplaced until I can find the original or get an original one at a swap meet.
Date published: 2017-06-10
Rated 3 out of 5 by from Workable solution These plates are different than ones I pulled out from under my seats. The plates I removed were rectangular - without an open end, but these plates were the only replacements I could find. Still not sure if these are the original style, or if the rectangular ones are correct. I did have to paint and double these plates up as they are significantly thinner than the previous ones.
Date published: 2019-06-03
Rated 3 out of 5 by from Part were thinner than the origional. Parts fit but were too thin, I used two sets and actually doubled them to get the seat tracks off the carpet.
Date published: 2017-08-08
Rated 5 out of 5 by from ONLY ONE WORD........EXCELLENT Iam restoring my mustang 66 in Mexico, City and I bought in the US and CJ Pony has a lot of parts and accessories and the prices are very low.
Date published: 2016-10-28
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1513, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.58ms
  • REVIEWS, PRODUCT

Thanks for your response. But which way is right side up since they have a bend.

Asked by: chawksfan
The bend goes down toward the floor.
Answered by: rk cjpp
Date published: 2019-01-21

Which direction do the track plates install under the seats

Asked by: chawksfan
The closed end faces away from the seat.
Answered by: rk cjpp
Date published: 2019-11-16

I’ve read that the reproduction track plates are much thinner than the originals.  Is it a good idea to double them up for proper function?  I also believe they were originally black. Are they available in black?  Thank you! 

Asked by: ShelbyCobra
You can double them up if needed. These will need painted.
Answered by: rk cjpp
Date published: 2018-02-07

Where are the seat track plates installed?

Asked by: Cascades
They install between the carpet and the seat track.
Answered by: rk cjpp
Date published: 2017-12-09

Hi, just wondered do you sell these individually, HW1513, I only need 2. Many thanks

Asked by: Daviduk
No, they aren't available individually.
Answered by: CJ Pony Parts
Date published: 2019-01-27
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_HW1513, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 11.39ms
  • QUESTIONS, PRODUCT