Sequential LED Taillight Kit 8-Pattern Mustang 1965-1966
Highlights
- Programmable
- Direct Fit
- Brighter Than Factory
- Uses Less Voltage
Sequential 8-Pattern LED Taillight Kit for 1965 and 1966 Mustangs.
Switch your incandescent bulbs for a Sequential 8-Pattern LED Taillight Kit to customize your 1965 or 1966 Mustang. Each of the 40 LED bulbs is self-contained within waterproof sealing. Keep your factory-style connectors, housings and lenses with a simple plug-and-play wiring for installation. A standard or demonstration flash mode will relay and/or mimic cyclical lighting at the demand of user-selectable sequential patterns. These bright LEDs provide excellent illumination and run extremely cool regardless of your Mustang's voltage. This kit is engineered for simple mounting, wiring and operation. All circuitry is self-contained with no separate control module to mount.
Features and Benefits:
- Custom 40-LED Lighting
- User-Selectable Sequential Patterns
- Plug-n-Play Wiring
- OEM-Style Connectors
- Hassle-Free Installation
- Self-Contained Waterproof Sealing
- Standard and Demonstration Modes
- Mounting Hardware Included
Standard Flash Mode and Demonstration Mode:
- Standard Flash Mode - Flashes all LEDs in all panels together with the flasher relay or solid light with brake. Mimics light bulb operation.
- Demonstration Mode - Steps through each sequential pattern cyclically. Flashes each sequence six times before stepping to the next sequence, then repeats.
Please Note: Requires low current draw flasher module. Sold separately.
California Residents: Proposition 65 Warning
Installation Videos
Video Transcript
These sequential LED taillights are going to be direct replacements for the factory bulbs found in your 1965-1966 Mustang. They're going to plug into the factory bulb socket, require the addition of one wire running to the front of the car to a 12 volt [source 00:00:29] to operate the programmability. You'll start off with a standard sequence, and then you have 8 additional programmable options to give yourself a real custom look. The 40 LED's going to be ultra bright and be much more effective than a factory bulb.
Here, we're going to show you some of the options for the LED as far as programmability. To change it, there's a button on the back. You simply push it. It gives you 8 different options beyond the original. Option 1, all panels flash at the same time for option 1. Option 2 will be your standard sequencing from basically inboard to outboard. Option 3, the same thing, but then it'll go back to the inboard. Option 4 will go by panels inside to out. It lights up in 3 sections, so it'll fit the 3 sections of the lens. Option 5 will be the same thing, except it's going to go in and then back out. Option 6 will be sequential starting int he center and going outward. 7 will be the same thing, inward to outward but then back in. Option 8's going to be panel sequentially, again, center to out. Again, that 3-panel design there. The last option, which will be option 9 on here, is going to be the same thing with the panels, but it's going to go center to out and then back in.
The programmability adds a very unique feature to these sequential LEDs that'll look great on your '65-'66 Mustang.
