SPEC Clutch Kit 11" Stage 2 10 Spline 1-1/16" Input Shaft 351 1968-1973"

SPEC Clutch: SF272
MSRP: $411.99
CJ's Low Price:
1508457600 5435
Earn 395 RPM Points What's this?
SPEC Clutch Kit 11" Stage 2 10 Spline 1-1/16" Input Shaft 351 1968-1973"
SPEC Clutch

Product Description

SPEC Stage 2 11" Clutch Kit with 10 Spline 1-1/16" Input Shaft for 1968-1973 351 Mustangs."

Average torque capacity of 530 ft. lbs.

For all mild to moderately modified naturally aspirated and power adder engines. (Also good for stock power levels and spirited driving when good daily drivability and extremely long life are the goal). Stock-like daily drivability and excellent wear characteristics.

High clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly, bearing and tool kit.

*May also work on 289/302 engines with a (164T) flywheel. Can be used on 1967-1969 390's that require a 11" clutch and 10 spline 1-1/16" input shaft. Can not use pilot bushing on 390 engines."

Similar Mustang Parts

similar Mustang parts More Clutch Kit  

Installation Instructions


Difficulty: Moderate

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 111.09ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Stroked 331 with a 164 tooth flywheel and a T5 trans. Will this clutch fit and is stage 2 sufficient to handle the extra hp (400 tops) and torque?

Asked by: Tucsonhooligan
  • y_2017, m_10, d_20, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_CK44, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 130.59ms

You Might Also Like