SPEC Clutch Kit 11" Stage 3 10 Spline 1-1/16" Input Shaft 351 1968-1973"

SPEC Clutch:
SF273
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 119.47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $408.00
$359.00
You save 12%

SPEC Stage 3 11" Clutch Kit with 10 Spline 1-1/16" Input Shaft for 1968-1973 351 Mustangs."

Average torque capacity of 650 ft. lbs.

For heavily modified street and race engines. Offers sufficient daily drivability with a comfortable pedal feel and quick engagement. Offers good wear characteristics under low and high stress usage.

High clamp pressure plate, 6 puck carbon semi-metallic friction with high torque sprung hub and disc assembly, bearing and tool kit.

*May also work on 289/302 engines with a (164T) flywheel. Can be used on 1967-1969 390's that require a 11" clutch and 10 spline 1-1/16" input shaft. Can not use pilot bushing on 390 engines. Not recommended for use with G-Force transmissions due to too much initial grip."

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.11ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 116.31ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;