StopTech Brake Rotor Slotted 4-Lug Front Passenger Side 5.0L 1987-1993

Excessive heat can cause resins in your brake pad to vaporize or "out-gas". As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here is where the StopTech 126.61026SR Front Passenger Side Slotted Disc Brake Rotor will make a big difference!

StopTech's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface clean. And in wet, raining conditions, StopTech's Vac-U-Slot helps push water off the braking surface for better stopping power.

StopTech rotors are finished in a durable black e-coat on the hat, edges and internal vanes to prevent corrosion. The braking surfaces are left in a bare iron finish to improve brake pad bed-in.

Features and Benefits:
-Castings include important O.E. details including extractor and set screw holes
-Superior cooling fin designs
-Double disc ground finish
-100% fully machined finish including rotor hats
-100% inspected and mill-balanced
-Lateral run-out held to 0.002" or less
-Meets or exceeds rigid quality specifications, including cooling vane designs

StopTech rotors are a direct replacement for your factory OE front rotors. For best results, follow the "Brake Pad Bed-In" instructions included with every shipment. Brake caliper service or rebuild is recommended for vehicles with higher mileage.

*1993 Cobras use Cobra specific rotors that have a taller rotor 'hat'. These rotors will work on a Cobra but wheel spacers are required if running the original 1993 Cobra wheels.

Order this StopTech 126.61026SR Front Passenger Side Slotted Disc Brake Rotor for your 1987, 1989, 1990, 1991, 1992 or 1993 5.0L Mustang with a 4-Lug Bolt Pattern today from CJ Pony Parts.