Vortech Polished V-1 Ti Supercharger System w/ Charge Cooler Mustang 5.0L 86-93

The heavy-duty V-1 Ti compressor in this Vortech system is capable of up to 950 hp depending on modifications and tuning. It is engine oil fed, so it requires oil feed and drain lines to the engine. Vortech H.O. systems are built for 7-9 psi of boost. An air-to-water charge cooler keeps the charge air path about as short as a non-cooled system, so there is virtually no boost loss, and the cooler, denser charge raises the detonation threshold.

Kit Includes:
- Vortech V-1 Ti supercharger
- Air-to-water charge cooler
- T-Rex fuel pump and fuel management unit (FMU)
- Cast aluminum mounting bracket with idler, drive belt, and hardware
- Inlet and discharge ducts with silicone sleeves and stainless steel clamps
- High-flow bypass valve
- Belts, pulleys, and reusable high-flow air filter

Features and Benefits:
- Heavy-duty V-1 Ti compressor capable of up to 950 hp
- Engine oil-fed supercharger
- Air-to-water charge cooling with virtually no boost loss
- 7-9 psi H.O. boost level
- High-efficiency impeller and housing developed in an SAE J1723 test cell
- High-flow bypass valve for surge-free operation
- Polished supercharger finish
- Smog legal per CARB Executive Order D-213-37

Vehicle Fitment:
- 1986-1993 Mustang 5.0L

Please Note:
A battery relocation kit is required and is sold separately.