Aluminized 2-1/4" Dual Exhaust Kit for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Small Block V8 Engine.
Is your Mustang in need of some exhaust work? Replace the damaged or rusted exhaust and replace them with this high quality kit today at CJ Pony Parts. This exhaust kit features a 2-1/4" exhaust that fits properly under the 1965-1973 Mustang. CJ Pony Parts offers everything needed to properly install this exhaust kit on your small block V8 engine.
- Long Tube H-Pipe
- Constructed From Aluminized Steel
- Driver Side Intermediate Pipe
- Passenger Side Intermediate Pipe
- Exhaust Clamps (8)
- Stock Style Mufflers (2)
- Driver Side Tail Pipe
- Passenger Side Tail Pipe
- Exhaust Hangers (2)
Please Note: This kit will NOT work with Mustangs that have Staggered Shocks.
The stock style mufflers are almost identical to the original mufflers that were found on the 1965-1973 Mustang. The baffles in this exhaust make it sound as close to stock as possible. The H-Pipe is designed to work with long tube headers and will require some cutting to fit. The Intermediate pipes feature the correct bends that are made to follow the floor contours. This kit provide the driver and passenger side intermediate pipes. The tail pipes start at the end of the mufflers and up over the rear end. The exhaust tips will need to be reused or purchase for a complete installation.
What kind of condition is your Mustang exhaust in? If it needs some repairs to get your Mustang back on the road, or you want to give your Mustang exhaust a major upgrade, check out the hundreds of 1965-1973 Mustang exhaust parts available from CJ Pony Parts. Choose from new headers, mufflers, pipes, gaskets or even complete exhaust systems, which will get your Mustang upgraded or back on the road. A new Mustang exhaust can also give your Mustang some additional performance and help make your Mustang sound awesome when rolling down the road. Order today!
Purchase a Aluminized 2-1/4" Dual Exhaust Kit for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Small Block V8 Engine from CJ Pony Parts today!
Product ReviewsWrite a review
Does this attach straight to the stock exhaust manifolds ? 1964.5 289 ci
I have 1973 mustang convertible with 5.0L v8. The car currently has a stock single exhaust system with cast manifold. I want to convert it to dual exhaust with possibly using H pipe but keeping the stock cast manifold (no headers) . What do you recommend
does this kit require welding to install
Is this the GT version and are there any other parts i have to buy to assemble it?
Will this exhaust kit work on a 1965 convertible Mustang?
Can the mufflers on this kit be upgraded to flow masters or magnaflows?
Will this exhaust kit work with standard exhaust manifold?
You Might Also Like
CJ's Low Price:$684.21
CJ's Low Price:$88.95