2-1/4" Dual Exhaust Kit Without H-Pipe for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Small Block V8 Engine.
Does your Mustang need some exhaust work? Replace the damaged or rusted exhaust pipes and replace them with this high quality kit today at CJ Pony Parts. This kit features a 2-1/4" exhaust that fits perfectly under your 1965-1973 Mustang. CJ Pony Parts offers everything needed to properly install this exhaust kit on your small block V8 engine.
- Driver Side Intermediate Pipe
- Passenger Side Intermediate Pipe
- Exhaust Clamps (6)
- Stock Style Mufflers (2)
- Driver Side Tail Pipe
- Passenger Side Tail Pipe
- Exhaust Hangers (2)
Please Note: This kit will NOT work with Mustangs that have Staggered Shocks.
This kit is designed for the Mustang owner that already has Stock Manifolds, Shorty Headers, Long Tube Headers or Tri-Y Headers and able to purchase this kit with the ideal H or X Pipe they choose. The stock style mufflers are almost identical to the original mufflers that were found on the 1965-1973 Mustang. The baffles in this exhaust make it sound as close to stock as possible.
The Intermediate pipes feature the correct bends that are made to follow the floor contours. This kit provide the driver and passenger side intermediate pipes. The tail pipes start at the end of the mufflers and up over the rear end. The exhaust tips will need to be reused or purchase for a complete installation.
What kind of condition is your Mustang exhaust in? If it needs some repairs to get your Mustang back on the road, or you want to give your Mustang exhaust a major upgrade, check out the hundreds of 1965-1973 Mustang exhaust parts available from CJ Pony Parts. Choose from new headers, mufflers, pipes, gaskets or even complete exhaust systems, which will get your Mustang upgraded or back on the road. A new Mustang exhaust can also give your Mustang some additional performance and help make your Mustang sound awesome when rolling down the road. Order today!
Purchase a new 2-1/4" Dual Exhaust Kit without H-Pipe for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Small Block V8 Engine from CJ Pony Parts today!
Product ReviewsWrite a review
Will this kit fit on a 67 convertible?
Ford never used the terminology "small block" as yo do on this product. I have a 1972 351 Cleveland. Will this exhaust kit fit it? thanks.
Do the mufflers have the brackets on them that bolt to the stock muffler hangers?
Hello, what is the price for the port of France? Sincerely, td
Hello, Will this kit work on a 71 convertible mustang? the tunnel is a bit tighter on this car and the 71 is quite a bit longer than a 65? part number EXK7. Thanks, Jeff
Does this need an H-Pipe to work? or is it complete from my manifolds back?
Will this kit work on a 1970 Mustang with a rear valance without cut outs?
You Might Also Like
CJ's Low Price:$50.99
CJ's Low Price:$45.99