Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012

CJ's Part Number: DBF233

Regular Price: $799.99

Special Price: $599.99

1487894400 64893
Order this rear brake kit to pair with your new front brake kit for a complete brake setup!
CJ's Low Price:
$499.99
Qty
Earn 599 RPM Points What's this?
1487030400 1488240000
On Sale: Up to 30% Off Sale!
Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012
Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012

Product Description

Front 4-Piston Disc Brake Kit for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 V6 and GT Mustangs, 2012-2013 Boss 302 Mustangs and 2007, 2008, 2009, 2010, 2011 and 2012 GT500 Mustangs.

After you have increased the horsepower of your 2005-2014 V6 or GT Mustang, you might want to start thinking about how you are going to bring all those pony’s to a stop. Take a look at this 4-Piston Front Disc Brake Kit from CJ Pony Parts! This kit takes the 4-piston caliper from the GT500 and Boss 302, and upgrades the rotors and brake lines for a great brake kit that won’t break the bank. While this kit is a big upgrade for V6 and GT Mustang owners, it is also a great direct replacement kit for all 2007-2012 GT500s, 2012-2013 Boss 302s and 2011-2014 GT Mustangs that were equipped with the optional front Brembo brake setup.

Front Disc Brake Kit Features:
- Remanufactured OE 4-piston calipers
- 13.98”/355mm Rotors
- Hardware kit included
- Premium coating of non-brake contact areas to prevent rust
- High-temp rubber boots for better heat dissipation
- Premium, cross-drilled and slotted rotors
- Stainless steel braided brake lines
- Red powder-coated calipers
- Semi-metallic upgraded brake pads

When increasing the horsepower of your Mustang, you always want to be sure that you can slow it back down, but most brake upgrade kits can be very costly. This front disc brake kit however, comes with a very affordable price tag. It also gives your 2005-2014 V6 or GT Mustang the stopping power you need with all those ponies under the hood.

This kit includes remanufactured 4-piston calipers from the GT500 and Boss 302. The calipers come with a red powder coated finish giving them a race inspired look. Continuing with the race inspired look, are premium, 13.98”/355mm cross-drilled and slotted rotors that are paired with the calipers. These rotors are not just about looks though, they increase stopping power, and heat dissipation. Cross drilling keeps the rotor cool, while the slotted cuts dissipate gasses and dust for better brake contact.

To reduce pressure drop in braking, this kit provides stainless steel braided brake lines, increasing consistent braking performance and longevity over ordinary rubber lines. This kit uses upgraded semi-metallic brake pads to increase braking performance further. A premium coating has been added to non-brake contact areas to prevent rust. A hardware kit is also included with this front disc brake kit.

The brakes in your Mustang are some of the most important parts in the car, yet often the most neglected. Many owners focus only on increasing performance and don't worry about the condition of the Mustang Brakes that are going to stop their car. No matter what year Mustang you have, CJ Pony Parts has the braking components that you need, whether you're upgrading the performance or replacing components that have worn from age and use.

Order this Front 4-Piston Disc Brake Kit for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 V6 or GT Mustang, 2012-2013 Boss 302 Mustang or your 2007, 2008, 2009, 2010, 2011 or 2012 GT500 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More 5-Lug Front Disc Brake Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Front Disc Brake Kit 4-Piston V6/GT 2005-2014/Boss 302 2012-2013/GT500 2007-2012 is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Red Candy GT I decided to finally buy this kit during the Christmas sale. My Ford dealer installed them shortly after I received them. After a week of break in I drove up Hwy. 74 and when I found a good road I made several high speed slow downs as I would on the track for a corner. The car pulled in a straight line. I also have CDC break cooling kit on the car. They look very good on Red Candy Mustang. My 19 inch wheels just clear. To those in California, the car will be at the Fablous Fords show at Knott's Berry Farm.
Date published: 2017-01-14
  • y_2017, m_2, d_23, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_DBF233, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 32.15ms
  • REVIEWS, PRODUCT

Product Questions

hello, the rotors are zinc black or zinc silver? it is not clear from the photos

Asked by: Alde
Zinc Silver.
Answered by: CJPP Dave
Date published: 2017-01-30

Are these offered in any other colors?

Asked by: giovavic68
No.
Answered by: CJPP Dave
Date published: 2017-01-06

Hi. I have a convertible 2011 mustang gt that came with 17" wheel.  Will this brake kit fit 17" wheels??

Asked by: Andy r
I do not think they will fit with 17" Wheels. Most likely you would have to step up to a 18" or 19" wheel.
Answered by: CJPP Dave
Date published: 2017-01-01

Will the MGP Caliper Covers fit the 4 Piston Caliper in this kit?

Asked by: Trick GT
No.
Answered by: CJPP Dave
Date published: 2016-09-07

Since you state "This kit takes the 4-piston caliper from the GT500 and Boss 302" that means these are refurbished Brembo calipers. Why aren't you stating these as such?

Asked by: skmcobra
We correctly call them out as remanufactured OE calipers in the product description.
Answered by: CJPP Dave
Date published: 2017-01-04

If i get this setup and later on i need to replace pads or the discs, which pads and discs can i use? Would the gt500 2012 pads and discs work with these calipers?

Asked by: Emarati
Yes they would.
Answered by: rk cjpp
Date published: 2016-06-15

Can the 2012 gt500 brake pads fit these calipers? What about the discs? (Were i am at its easier to get gt500 pads and discs for there next service)

Asked by: Emarati
This kit is a direct replacement for the 07-12 GT500.
Answered by: rk cjpp
Date published: 2016-06-15

I would like these for my 2006 V6 4.0. Are there any other brackets or adapters I would need to install this? 

Asked by: Exael
Nope, everything is included.
Answered by: CJPP Dave
Date published: 2016-06-06
  • y_2017, m_2, d_23, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_DBF233, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 34.66ms
  • QUESTIONS, PRODUCT

You Might Also Like