Maximum Motorsports Roll Bar Sport 4-Point Without Door Bars With Fixed Harness Mount Mustang Convertible 1983-1993

Maximum Motorsports offers this 4-Point Sport Roll Bar (MMRB-10.2) without Door Bars specifically for 1983-1993 Convertible Mustangs. The Sport roll bar will increase the rigidity of your chassis and comes with a fixed harness mount tube for safe attachment of a 5-point harness' shoulder belts.

Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. This roll bar is made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.

Features and Benefits:
- Fixed Harness Mount
- Stiffens Chassis
- Grade 5 or Higher Hardware
- 1-3/4" Diameter by 0.134" Wall DOM Tube

Maximum Motorsports includes reinforcement plates for the convertible chassis. These reinforcements are welded into place behind the rear seat to provide a good structural attachment point for the rear braces. During installation, the convertible top can be lowered and stowed, which provides very easy access to protect the interior and complete the required welding. The roll bar bolts into its final position, and can be removed from the car as a complete unit. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.

All of Maximum Motorsports roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Additional Notes:
- This roll bar does NOT conform to NHRA and NMRA rules.
- Roll bars in convertibles will not accommodate a light bar.
- Convertible tonneau covers will not fit after a roll bar installation.
- The Maximum Motorsports Roll Bar for Mustang convertibles does require welding to the floor pan. Someone who is a qualified "expert welder" is required for the installation of a convertible roll bar.

ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.