Power Antenna Kit Chrome Finish 1964-1973

CJ's Part Number: ANT15
CJ's Low Price:
1454716800 1767
Earn 67 RPM Points What's this?
Power Antenna Kit Chrome Finish 1964-1973

Product Description

Universal Power Antenna Assembly for 1964-1973 Mustangs.

This complete kit allows you to easily install a modern style power antenna into your classic Mustang.

Similar Mustang Parts

similar Mustang parts More Restomod Exterior Trim  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Power Antenna Kit Chrome Finish 1964-1973 is rated 4.25 out of 5 by 4.
Rated 4 out of 5 by from Better than I thought. I installed this on my '70 Mach 1 after repaint. 4 stars because the power, ground and activation wire could have been longer. Also, the adapter pieces are flimsy and there are no drawings. This is a 'universal' style antenna with several adapters included. The antenna installed into my stock fender hole using a combination of included parts, original parts and small piece of aluminum I drilled a hole in. The look is pretty nice and it just cleared the passenger door after it was secured down.
Date published: 2015-06-24
Rated 4 out of 5 by from surprisingly nice. Bought this after my car cover ripped my "concourse collapsible" antenna off the car in a particularly awful storm. I pulled it out to verify that it would mount in the stock location without modification to the area and see how I was going to mount it. It turns out that in a half hour I had installed it with no parts but what are included, reusing the mount plate and trim from the factory repro antenna. It fits perfectly in the fender space and clears the door, which is surprising to me because there was a lot less room in there than I remembered. . You will need to wire the antenna to a power source to make it work (ground, batterey hot, switched hot- some aftermarket radios give you a wire for this) and don't toss the old antenna until you get all the parts from it to reuse. You won't win any shows with this obvious aftermarket antenna, but you won't have to punch holes in your car covers or worry when you go to the car wash. 4 out of 5 stars because there's mo print instructions, just diagrams on the box and a few nice pictures.
Date published: 2015-03-02
Rated 5 out of 5 by from Works Great I had this installed on my 1968 Mustang so I could put on my cover without poking a hole in it. I had to use some parts from the original antenna, but that was really not a problem. This antenna looks nice and works as it should......<><
Date published: 2015-09-25
Rated 4 out of 5 by from Great product All installed and working well. Very little info on installation instructions but not too difficult to suss out
Date published: 2015-12-13
  • 2016-02-06T09:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_ANT15, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


I was wondering, does this antenna come with a chrome trim piece on the top to bolt the antenna to the fender? And is there a nut and washer along with that. 

Asked by: Tyler M
There are several adapters included. Using the included adapters and your stock trim pieces it will work fine.
Answered by: rk cjpp
Date published: 2016-01-05

How much space is needed under fender.

Asked by: Henryh
It doesn't take up a whole lot more space than the OEM Mustang antenna.
Answered by: CJ Pony Parts
Date published: 2015-09-29

I do not see a base on the picture. What seals the hole in the fender?

Asked by: novus3
This kit is kind of "universal" and has several different adapters to make it fit the angle of the fender. It also has seals with it.
Answered by: USN Mustang
Date published: 2015-12-15

I bought the power antenna and installed it on my 65 mustang the antenna goes up when you turn the radio and goes down when turned off but I get no signal is there some adapter I need the radio worked fine with the old antenna I would appreciate any help.

Asked by: Old car guy 78
Sounds like a wiring issue - one of the wires got connected incorrectly, perhaps the ground.
Answered by: CJ Pony Parts
Date published: 2015-03-30

Hi, How easy is it to install this on a '66 coupe in the "normal" front passenger quarter panel before?  Can you do it with removing the splash shield or do you have to remove the entire fender?

Asked by: Cooper
Bill installs a similar antenna on our Weekend Wrench project car -- http://www.youtube.com/watch?v=5BT-9dr7c8c
Answered by: CJPP Staff
Date published: 2015-12-10
  • 2016-02-06T10:12CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_ANT15, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like