Pair of Steeda Subframe Connectors for 2005-2014 Mustang Coupes.Steeda's 3-point torque box and frame rail braces are made from 4130 Chrome Moly material. This material is twice as strong as mild steel. These braces are specifically designed for the S197 Mustang. They tie together the inner/outer frame rails and the rear lower control arm mount. Our braces are silver powdercoated and come with mounting hardware. Can be bolted with supplied hardware but a welded installation is recommeded for maximum benefit from these braces.
*Does not fit convertibles.
100% Liked. Used NO Jack Stands,and No Lift. Sitting level in the Driveway, worked just fine. I have a 2012 GT500 and everything worked fine, just follow the instructions. You will need a screw driver, rubber hammer, 10 mm, 13mm and 15mm sockets, with a couple of pieces of cardboard to lay on and set the connector on underneath the car. Everything is pretty much straight forward. I found it easier to attach the inter rail bolt first then the side frame bolts and the control arm bolt last, this probably will require the rubber hammer to get into place. I left the other bolts loose until I have the control arm bolt in then tighten all the bolts. Took about 1 hour with no helper.
You Might Also Like
CJ's Low Price:$94.99
CJ's Low Price:$192.99