ARP Flexplate Bolt Pro Series Set Automatic Transmission GT/Cobra 1996-2004/Mach 1 2003-2004



  • 8740 Chrome Moly Construction
  • Black Oxide Fastener Finish
  • Yield Strength Of 190,000 PSI
  • 12-Point Fastener Head Style
MSRP $82.21
You save 36%

Set of Eight ARP Pro Series Flexplate Bolts for 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 GT and Cobra and 2003-2004 Mach 1 Mustangs with an Automatic Transmission.

This Set of Eight Pro Series Flexplate Bolts from ARP is designed for your 1996-2004 GT or Cobra or 2003-2004 Mach 1 Mustang with an automatic transmission and a 2V or 4V 4.6L engine. These Pro Series flexplate bolts give you all that you need to bolt in your flexplate with confidence. They're much stronger than OEM hardware, forged from 8740 chromoly steel and heat-treated prior to thread rolling and machining. These bolts feature a 12-point head design and a larger-than-stock shank diameter for increased strength and improved positioning of the flexplate.

Specifications of the Set of Eight ARP Pro Series Flexplate Bolts (254-2901):
Rear Main Seal Style: 1-piece
Thread Size: 10mm x 1.0
Underhead Length: 0.800".
Fastener Yield Strength: 190,000 psi
Washers Included: No
Head Style: 12-point
Fastener Finish: Black Oxide
Fastener Material: 8740 Chromoly Steel

- 1996-2004 Mustang GT
- 1996-2004 Cobra
- 2003-2004 Mach 1

Tech Tip: ARP recommends using the ARP Ultra-Torque Fastener Assembly Lubricant (CJ's Part # 1009910) as opposed to motor oil or other low quality lubricants. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when insufficient lubricants are used.

Please Note: While following the manufacturer's recommended torque sequence, tighten the nuts to the ARP recommended torque specifications using ARP Ultra-Torque Fastener Assembly Lubricant.

Your Mustang is held together by a myriad of nuts, bolts and screws. What happens if that hardware fails, or you need to upgrade it to handle additional performance? With the hardware from ARP, you're getting the best products on the market, and those trusted by Formula 1, IndyCar, NHRA and NASCAR.

Order this Set of Eight ARP 254-2901 Pro Series Flexplate Bolts for your 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 GT or Cobra or 2003-2004 Mach 1 Mustang with an Automatic Transmission from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Transmission, Mustang Flywheels & Flexplates, Mustang Transmission Hardware

Installation Difficulty


Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account