ARP Flywheel Bolt Pro Series Set Manual Transmission GT/Cobra 1996-2004/Mach 1 2003-2004



  • 190,000 PSI Tensile Strength
  • 12-Point Head
  • Black Oxide Finish
  • Chromoly Construction
MSRP $83.17
You save 36%

Set of Eight ARP Pro Series Flywheel Bolts for 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 GT and Cobra and 2003-2004 Mach 1 Mustangs with a Manual Transmission.

This Set of Eight Pro Series Flywheel Bolts from ARP is designed for your 1996-2004 GT or Cobra or 2003-2004 Mach 1 Mustang with a manual transmission and a 2V or 4V 4.6L engine. These flywheel bolts give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from 8740 chromoly steel and are heat-treated prior to thread rolling and machining. These bolts feature a 12-point head design and a larger-than-stock shank diameter for increased strength and improved positioning of the flywheel.

ARP's 254-2801 Pro Series Flywheel Bolts Specifications:
Rear Main Seal Style: 1-piece
Thread Size: 10mm x 1.0
Washers Included: No
Fastener Yield Strength: 190,000 psi
Head Style: 12-point
Fastener Finish: Black Oxide
Fastener Material: 8740 Chromoly Steel

- 1996-2004 Mustang GT
- 1996-2004 Cobra
- 2003-2004 Mach 1

Tech Tip: ARP recommends using the ARP Ultra-Torque Fastener Assembly Lubricant (CJ's Part # 1009910) as opposed to motor oil or other low quality lubricants. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when insufficient lubricants are used.

Please Note: While following the manufacturer's recommended torque sequence, tighten the nuts to the ARP recommended torque specifications using ARP Ultra-Torque Fastener Assembly Lubricant.

Your Mustang is held together by a myriad of nuts, bolts and screws. What happens if that hardware fails, or you need to upgrade it to handle additional performance? With the hardware from ARP, you're getting the best products on the market, and those trusted by Formula 1, IndyCar, NHRA and NASCAR.

Order this Set of Eight ARP 254-2801 Pro Series Flywheel Bolts for your 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 GT or Cobra or 2003-2004 Mach 1 Mustang with a Manual Transmission from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account